Product Features PDF 2-phase hybrid step motor High torque design Standard NEMA 17 dimensions Series or parallel wiring $54.00 Add to Cart: HT17-273 ($54.00) Part Number w/ Single Shaft HT17-273D ($54.00) Part Number w/ Double Shaft Quantity U.S. & Canada Outside the U.S. and Canada, or looking for volume discounts?Request a quote Product Details Vertical Tabs DescriptionThe HT17-273 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series and bipolar parallel. SpecificationsPart Number: HT17-273Frame Size: NEMA 17Motor Type: High torquePart Number w/Double Shaft: HT17-273DPart Number w/Encoder: HT17-273D-WAAEncoder Feedback: OptionalEncoder Resolution: 2,000 lines (8,000 counts quadrature)Motor Length: 1.57 inchesNumber of Lead Wires: 8Lead Wire Configuration: flying leads, no connectorLead Wire/Cable Length: 12 inchesLead Wire Gauge: 26 AWGUnipolar Holding Torque: 36.8 oz-inBipolar Holding Torque: 51.0 oz-inStep Angle: 1.8 degBipolar Series Current: 0.28 A/phaseBipolar Series Resistance: 60.0 Ohms/phaseBipolar Series Inductance: 104 mH/phaseBipolar Parallel Current: 0.57 A/phaseBipolar Parallel Resistance: 15.0 Ohms/phaseBipolar Parallel Inductance: 26.0 mH/phaseUnipolar Current: 0.40 A/phaseUnipolar Resistance: 30.0 Ohms/phaseUnipolar Inductance: 26.0 mH/phaseRotor Inertia: 8.07E-04 oz-in-sec2Integral Gearhead: NoWeight: 0.6 lbsStorage Temperature: -30 to 70 °COperating Temperature: -20 to 50 °CInsulation Class: Class B (130 ºC)Shaft Diameter: 5 mm (0.197 inch)Shaft Run Out: 0.001 inch T.I.R. maxRadial Play: 0.001 inch max w/ 1.1 lb loadEnd Play: 0.003 inch max w/ 1.1 lb loadPerpendicularity: 0.004 inchesConcentricity: 0.002 inches DownloadsDatasheet: StepMotorWiring-8-lead-striped.pdf Stepper Motor Life data-110817.pdf2D Drawing: HT17-273 RevC.pdf3D Drawing: 17HT39D.igs HT17_39mm_wWAA_encoder.igs Recommended Products Filter by product type All Products Accessory Gearhead Stepper Drive 40PE004 40 mm Planetary Gearhead, 4:1 ratio Gearhead 40PE005 40 mm Planetary Gearhead, 5:1 ratio Gearhead 40PE007 40 mm Planetary Gearhead, 7:1 ratio Gearhead 40PE010 40 mm Planetary Gearhead, 10:1 ratio Gearhead 40PE015 40 mm Planetary Gearhead, 15:1 ratio Gearhead 40PE025 40 mm Planetary Gearhead, 25:1 ratio Gearhead 40PE060 40 mm Planetary Gearhead, 60:1 ratio Gearhead 40PE100 40 mm Planetary Gearhead, 100:1 ratio Gearhead 3004-195-10 WAA, YAA, ZAA Encoder Extension Cable, 10 ft Accessory 3004-257 WAA, YAA, ZAA Encoder Extension Cable with flying leads Accessory WAA Encoder Incremental Encoder for HT17 Step Motors Accessory Request a Quote First Name * Last Name * Company * Email * Phone * Comment Subscribe to our monthly E-Newsletter * Yes No Leave this field blank
