HT11-020 | Applied Motion

Product Features

PDF

2-phase hybrid step motor
High torque design
Standard NEMA 11 dimensions

$49.00

Product Details

Vertical Tabs

Description

The HT11-020 two-phase stepper motor is suitable for a wide range of motion control applications.

Specifications

Part Number:

HT11-020

Frame Size:

NEMA 11

Motor Type:

High torque

Part Number w/Double Shaft:

HT11-020D

Motor Length:

1.22 inches

Number of Lead Wires:

Lead Wire Configuration:

flying leads, no connector

Lead Wire/Cable Length:

8 inches

Lead Wire Gauge:

26 AWG

Bipolar Holding Torque:

7.08 oz-in

Step Angle:

1.8 deg

Bipolar Parallel Current:

1.0 A/phase

Bipolar Parallel Resistance:

1.4 Ohms/phase

Bipolar Parallel Inductance:

1.3 mH/phase

Rotor Inertia:

1.27E-04 oz-in-sec²

Integral Gearhead:

Weight:

0.22 lbs

Storage Temperature:

-30 to 70 °C

Operating Temperature:

-20 to 50 °C

Insulation Class:

Class B (130 ºC)

Maximum Radial Load:

3.37 lbs

Maximum Thrust Load:

1.80 lbs

Shaft Diameter:

5 mm (0.197 inch)

Shaft Run Out:

0.001 inch T.I.R. max

Radial Play:

0.001 inch max w/ 1.1 lb load

End Play:

0.003 inch max w/ 1.1 lb load

Perpendicularity:

0.004 inches

Concentricity:

0.003 inches

Downloads

Datasheet:

StepMotorWiring-4-lead.pdf

2D Drawing:

HT11-020_RevA.pdf

3D Drawing:

HT11-020.igs

HT11-020D.igs

Speed-Torque Curves:

ST_Speed_Torque_revF_Size11.pdf

You are here

HT11-020 - NEMA 11 High Torque Step Motor

Interested in this product?

Product Features

Product Details

Vertical Tabs

Recommended Products

Request a Quote