HT08-230 | Applied Motion

Product Features

2-phase hybrid step motor
1.8 degree step angle
High torque design
Standard NEMA 8 dimensions

$44.00

Request a quote

Product Details

Vertical Tabs

Description

The HT08-230 two-phase stepper motor is suitable for a wide range of motion control applications.

Specifications

Part Number:

HT08-230

Frame Size:

NEMA 8

Motor Type:

High torque

Part Number w/Double Shaft:

HT08-230D

Motor Length:

1.16 inches

Number of Lead Wires:

Lead Wire Configuration:

flying leads, detachable harness

Lead Wire/Cable Length:

18 inches

Lead Wire Gauge:

26 AWG

Bipolar Holding Torque:

2.69 oz-in

Step Angle:

1.8 deg

Bipolar Parallel Current:

0.35 A/phase

Bipolar Parallel Resistance:

11.5 Ohms/phase

Bipolar Parallel Inductance:

3.4 mH/phase

Rotor Inertia:

2.27E-05 oz-in-sec²

Integral Gearhead:

Weight:

.088 lbs

Storage Temperature:

-30 to 70 °C

Operating Temperature:

-20 to 50 °C

Insulation Class:

Class B (130 ºC)

Maximum Radial Load:

5.2 lbs

Maximum Thrust Load:

Push: 1.3 lbs; Pull: 5.6 lbs

Shaft Diameter:

4 mm (0.157 inch)

¹ L10; 20,000 hours; 1,000 rpm; Standard shaft length only; Radial load at end of shaft. ↩

Torque Curves

Downloads

Datasheet:

StepMotorWiring-4-lead.pdf

Stepper Motor Life data-110817.pdf

2D Drawing:

HT08-230_RevB.PDF

3D Drawing:

HT08-230_RevB.STEP

HT08-230D_RevB.STEP

You are here

HT08-230 - NEMA 8 High Torque Step Motor

Interested in this product?

Product Features

Product Details

Vertical Tabs

Recommended Products

Request a Quote