17068-2-18S | Applied Motion

Product Features

Cost effective gearmotor
NEMA 17 step motor with gearhead
18:1 ratio amplifies step motor torque
Offset parallel output shaft
High torque design
Strong composite gearhead body

Not available for new applications. Please call for assistance selecting a replacement.

1-800-525-1609

Product Details

Vertical Tabs

Description

The 17068-2-18S stepper gearmotor is a NEMA 17 step motor and 18:1 gearhead pre-assembled for ease-of-use and greater output torque than the step motor by itself. The gearmotor is no longer in production. For assistance with selecting a replacement motor and gearbox please contact us.

Specifications

Part Number:

17068-2-18S

Frame Size:

NEMA 17

Motor Type:

Gearmotor

Motor Length:

2.28 inches

Number of Lead Wires:

Lead Wire Configuration:

flying leads, no connector

Lead Wire/Cable Length:

12 inches

Lead Wire Gauge:

26 AWG

Unipolar Holding Torque:

125 oz-in

Bipolar Holding Torque:

125 oz-in

Step Angle:

1.8 deg

Bipolar Series Current:

0.67 A/phase

Bipolar Series Resistance:

8.4 Ohms/phase

Bipolar Series Inductance:

11.2 mH/phase

Bipolar Parallel Current:

1.34 A/phase

Bipolar Parallel Resistance:

2.1 Ohms/phase

Bipolar Parallel Inductance:

2.8 mH/phase

Unipolar Current:

1.10 A/phase

Unipolar Resistance:

4.2 Ohms/phase

Unipolar Inductance:

2.8 mH/phase

Rotor Inertia:

7.93E-04 oz-in-sec²

Integral Gearhead:

Yes

Weight:

1.0 lbs

Storage Temperature:

-40 to 70 °C

Operating Temperature:

-20 to 50 °C

Insulation Class:

Class B (130 ºC)

Maximum Radial Load:

4.5 lbs

Maximum Thrust Load:

3.5 lbs

Shaft Diameter:

6.35 mm (0.250 inch)

Downloads

Datasheet:

StepMotorWiring-8-lead-striped.pdf

2D Drawing:

17-2-18_RevB.pdf

HT17-068P_RevE.pdf

3D Drawing:

17HT33_17068-2-18S.igs

You are here

17068-2-18S - NEMA 17 Stepper Gearmotor

Interested in this product?

Product Features

Product Details

Vertical Tabs

Recommended Products

Request a Quote