You are here

Software Downloads

Showing all available Software Downloads:

  • Step-Servo Quick Tuner

    Configure, tune and program StepSERVO products

    Product Features

    • Drive configuration
    • Servo loop tuning
    • Built-in Q programming
    • Diagnostics

    All-in-one tuning, configuration and programming software for step servo drives.

    Learn More...

    System Requirements

    Windows XP, Vista, 7, 8, 10, 32 or 64 bits.
    .Net Framework 2.0 required.

  • STF Configurator

    Configure and program STF Stepper Drives

    Product Features

    • Drive configuration
    • Built-in Q programming
    • Diagnostics

    All-in-one configuration and programming software for STF Stepper Drives.

    Learn More...

    System Requirements

    Works with Windows XP, Vista, 7, 8, and 10; 32 or 64 bits. .Net Framework 2.0 required.

  • SVX Servo Suite

    Tune, Configure and Program SV200 Digital Servo Drives

    Product Features

    • Initiate auto-tuning
    • Optimize tuning parameters
    • Configure control modes
    • Create and download stored Q Programs (C, IP and Q drives only)

    Tune, Configure and Program SV200 Digital Servo Drives

    Learn More...

    System Requirements

    Windows XP (SP3 required), 7, 8 or 10, 32-bit or 64-bit.

  • ST Configurator™

    Configure all ST, STAC and STM stepper products

    Product Features

    • Intuitive interface
    • Supports all ST and STAC stepper drives
    • Supports all STM integrated steppers
    • Drive status and alarm monitoring
    • Self-test function to test drive/motor operation

    ST Configurator™ version 3.2 is now available, and provides seamless communication with all models whether they have RS-232, RS-485, CANopen or Ethernet communications. It also includes a built-in Q Programmer™ so you can switch context quickly and easily.

    Learn More...

    System Requirements

    Microsoft Windows 7, 8, 10, Vista, XP, 32-bit or 64-bit

  • Quick Tuner™

    Tune and Configure Servo Drives

    Product Features

    • Servo loop tuning and drive setup
    • Works with SV7, SVAC3, and BLu servo drives
    • Built-in oscilloscope
    • Preloaded with tuning files for all Applied Motion servo motors

    Quick Tuner™ is Applied Motion’s servo tuning and configuration tool, used to setup and tune all Applied Motion servo drives.

    Learn More...

    System Requirements

    Microsoft Windows 7, 8, 10, Vista or XP, 32-bit or 64-bit

  • Q Programmer™

    Create Single-Axis Motion Control Programs for Q and Plus Drives

    Product Features

    • Single-axis motion control
    • Stored program execution
    • Multi-tasking
    • Conditional processing
    • Math functions
    • Data registers

    Q Programmer™ is a single-axis motion control software for programmable stepper and servo drives from Applied Motion Products. The software allows users to create sophisticated and functional programs that Q and Plus drives can run stand-alone.

    Learn More...

    System Requirements

    Microsoft Windows 7, 8, 10, Vista or XP, 32-bit or 64-bit

  • Si Programmer™

    Create Stand-Alone Indexing Programs for i and Si Drives

    Product Features

    • Single-axis indexing
    • Easy to use
    • Intuitive
    • Functional
    • Point-and-click programming

    Intended for use in stand-alone applications, Si Programmer™ provides quick and easy programming with an extremely friendly, point-and-click interface that does not require any software programming experience. Si Programmer™ works with both stepper and servo drives.

    Learn More...

    System Requirements

    Microsoft Windows 7, 10, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • SCL Utility

    Terminal Utility for Streaming Serial Commands

    Product Features

    • Stream SCL commands from the command line
    • Simple interface
    • Works with all RS-232, RS-485, and Ethernet ports
    • Write and save SCL command scripts

    If you plan to stream serial commands to an Applied Motion Products drive using the Serial Command Language (SCL), you’ll need a simple terminal emulator to get familiar with and test your command strings. SCL Utility is the ideal choice because it sends command strings as a packet, with minimal delay between characters, and properly terminated with a carriage return.

    Learn More...

    System Requirements

    Microsoft Windows 7, 10, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • SiNet Hub Programmer™

    Si Programming for Multiple Drives

    Product Features

    • Multi-axis indexing
    • Based on popular Si Programmer™ software
    • Easy to use
    • Intuitive
    • Functional
    • Point-and-click programming

    If you’re already familiar with Si Programmer™ and want to move to multi-axis control, SiNet Hub Programmer™ and one of the SiNet™ Hubs may be the right solution. SiNet Hub Programmer™ takes the familiar interface of the single-axis Si Programmer™ software and augments it to handle up to 4 or 8 axes, depending on whether you use it with the Hub 444 or Hub 8, respectively.

    Learn More...

    System Requirements

    Microsoft Windows 8, 7, 10, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • eXposition™

    Configure 2035XD Stepper Drives

    Product Features

    • Used with 2035XD stepper drives
    • Also supports legacy “BL” servo drives

    If you’re using a 2035XD stepper drive, or a legacy servo drive like the BL7080x or BLx7080, you’ll need eXposition™ to configure your drive.

    Learn More...

    System Requirements

    Microsoft Windows 7, 10, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

Pages