You are here
Software Downloads
Showing all available Software Downloads:
-
Step-Servo Quick Tuner
Configure, tune and program StepSERVO productsProduct Features
- Drive configuration
- Servo loop tuning
- Built-in Q programming
- Diagnostics
All-in-one tuning, configuration and programming software for step servo drives.
Learn More...System Requirements
Windows XP, Vista, 7, 8, 10, 32 or 64 bits.
.Net Framework 2.0 required. -
STF Configurator
Configure and program STF Stepper DrivesProduct Features
- Drive configuration
- Built-in Q programming
- Diagnostics
All-in-one configuration and programming software for STF Stepper Drives.
Learn More...System Requirements
Works with Windows XP, Vista, 7, 8, and 10; 32 or 64 bits. .Net Framework 2.0 required.
-
SVX Servo Suite
Tune, Configure and Program SV200 Digital Servo DrivesProduct Features
- Initiate auto-tuning
- Optimize tuning parameters
- Configure control modes
- Create and download stored Q Programs (C, IP and Q drives only)
Tune, Configure and Program SV200 Digital Servo Drives
Learn More...System Requirements
Windows XP (SP3 required), 7, 8 or 10, 32-bit or 64-bit.
-
MDX Servo Suite
Tune, Configure and Program MDX Integrated Servo MotorProduct Features
- Tune MDX Integrated Servo Motors
- Built-in sampling oscilloscope
- Configure control modes
- Test settings and sample moves
- Create and download stored Q Programs
Tune, Configure and Program MDX Integrated Servo Motors
Learn More...System Requirements
Windows XP (SP3 required), 7, 8 or 10, 32-bit or 64-bit.
-
ST Configurator™
Configure all ST, STAC and STM stepper productsProduct Features
- Intuitive interface
- Supports all ST and STAC stepper drives
- Supports all STM integrated steppers
- Drive status and alarm monitoring
- Self-test function to test drive/motor operation
ST Configurator™ provides seamless communication for all supported drive and integrated motor models whether they have RS-232, RS-485, CANopen or Ethernet communications. The software also includes a built-in Q Programmer™ so you can switch context quickly and easily.
Learn More...System Requirements
Microsoft Windows 7, 8, 10, Vista, XP, 32-bit or 64-bit
-
Quick Tuner™
Tune and Configure Servo DrivesProduct Features
- Servo loop tuning and drive setup
- Works with SV7, SVAC3, and BLu servo drives
- Built-in oscilloscope
- Preloaded with tuning files for all Applied Motion servo motors
Quick Tuner™ is Applied Motion’s servo tuning and configuration tool, used to setup and tune all Applied Motion servo drives.
Learn More...System Requirements
Microsoft Windows 7, 8, 10, Vista or XP, 32-bit or 64-bit
-
Q Programmer™
Create Single-Axis Motion Control Programs for Q and Plus DrivesProduct Features
- Single-axis motion control
- Stored program execution
- Multi-tasking
- Conditional processing
- Math functions
- Data registers
Q Programmer™ is a single-axis motion control software for programmable stepper and servo drives from Applied Motion Products. The software allows users to create sophisticated and functional programs that Q and Plus drives can run stand-alone.
Learn More...System Requirements
Microsoft Windows 7, 8, 10, Vista or XP, 32-bit or 64-bit
-
Si Programmer™
Create Stand-Alone Indexing Programs for i and Si DrivesProduct Features
- Single-axis indexing
- Easy to use
- Intuitive
- Functional
- Point-and-click programming
Intended for use in stand-alone applications, Si Programmer™ provides quick and easy programming with an extremely friendly, point-and-click interface that does not require any software programming experience. Si Programmer™ works with both stepper and servo drives.
Learn More...System Requirements
Microsoft Windows 7, 10, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit
-
SCL Utility
Terminal Utility for Streaming Serial CommandsProduct Features
- Stream SCL commands from the command line
- Simple interface
- Works with all RS-232, RS-485, and Ethernet ports
- Write and save SCL command scripts
If you plan to stream serial commands to an Applied Motion Products drive using the Serial Command Language (SCL), you’ll need a simple terminal emulator to get familiar with and test your command strings. SCL Utility is the ideal choice because it sends command strings as a packet, with minimal delay between characters, and properly terminated with a carriage return.
Learn More...System Requirements
Microsoft Windows 7, 10, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit
-
SiNet Hub Programmer™
Si Programming for Multiple DrivesProduct Features
- Multi-axis indexing
- Based on popular Si Programmer™ software
- Easy to use
- Intuitive
- Functional
- Point-and-click programming
If you’re already familiar with Si Programmer™ and want to move to multi-axis control, SiNet Hub Programmer™ and one of the SiNet™ Hubs may be the right solution. SiNet Hub Programmer™ takes the familiar interface of the single-axis Si Programmer™ software and augments it to handle up to 4 or 8 axes, depending on whether you use it with the Hub 444 or Hub 8, respectively.
Learn More...System Requirements
Microsoft Windows 8, 7, 10, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit
