The STM23XIP-3DN integrated stepper is a drive+motor unit, fusing a NEMA 23 step motor and a sophisticated 5.0 A/phase (peak-of-sine) stepper drive into a single device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. See Recommended Products section below for compatible 24 and 48 volt DC power supplies.
The STM23XIP-3DN integrated stepper motor incorporates EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. Implicit (Class 1) and explicit (Class 3) messaging are supported. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 Mbit/sec. All drive+motor features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. The motor can be operated in several different control modes, including Streaming Command mode using SCL, Pulse & Direction mode and Velocity mode. The motor can also run a Q program stored in non-volatile memory. Q programs are created using Applied Motion's Q Programmer™ software, which provides powerful commands for motion, I/O, conditional processing, multi-tasking, math functions, and more. Setup and configuration of the STM23XIP is done using Applied Motion’s ST Configurator™ software, while Q programs are created using the Q Programmer™ software.
The STM23XIP-3DN integrated motor does not include an integral encoder. See the STM23XIP-3DE for the model with encoder.
Inputs and Outputs
Each STM23XIP integrated stepper comes with 6 digital inputs, 3 digital outputs and 1 analog input. The digital inputs accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors or other signals. The digital outputs can be connected to PLC inputs, counters, lights, relays or other devices. The analog input accepts 0-5 VDC signals and can be used for velocity and position control.
The STM23XIP-3DN comes with fast 10/100 Mbit dual-port Ethernet for programming and EtherNet/IP communications. The same ports support TCP and UDP protocols for sending commands from Applied Motion's proprietary serial command language (SCL).
What's in the Box?
- STM23XIP-3DN integrated motor
- Mating connectors
- Quick Setup Guide (also available in Downloads)
- 3004-398-2M I/O cable (optional)
- DC power supply (required), see Power Supplies below
- Regen clamp (optional), see Accessories below
- Additional accessories available below
All STM23XIP models are CE approved and RoHS compliant.