You are here

Accessories in: Cables, Communication & I/O Cables

Showing all accessories in the selected category.

  • 3004-189

    Serial Programming Cable for RS-232 Ports

    Product Features:

    • 10 foot cable
    • 9-pin D-Sub to RJ-11
    • Used for setup, configuration, and programming
    • All drives with an RS-232 port
  • 3004-190

    Serial Cable for SiNet Hubs and MMIs

    Product Features:

    • RJ-11 to RJ-11 cable
    • Compatible with SiNet Hub 444 and SiNet Hub 8 multi-axis controllers
    • Compatible with MMI-01 and MMI-02 operator interfaces
  • 3004-195-10

    Encoder Extension Cable, 10 ft

    Product Features:

    • Compatible with WAA, YAA, and ZAA encoders
    • JAE connector on encoder end
    • High-density 15-pin D-sub on drive end
  • 3004-235

    USB to RS232 serial adapter

    Product Features:

    • Allows RS-232 drives to be connected to your PC’s USB port
    • Serial Connector: DB-9 male
    • Cable Length:10 inches (25 cm)
    • Windows 98, ME, 2000, XP, Vista, 7 (32/64 bit)
  • 3004-257

    Encoder Extension Cable with flying leads

    Product Features:

    • Compatible with WAA, YAA, and ZAA encoders
    • JAE connector on encoder end
    • Flying leads on other end
  • 3004-263

    Encoder Extension Cable, 3 ft

    Product Features:

    • Compatible with the STM17R and STM23R integrated steppers with encoder options
    • Connects to incremental encoder on one end
    • Flying leads on other end for connecting to external controller
  • 3004-272-1M

    Brushless DC Motor Cable, 1 m

    Product Features:

    • Extension cable for brushless DC motors and drives
    • Compatible with BL motors and BD drives
  • 3004-272-3M

    Brushless DC Motor Cable, 3 m

    Product Features:

    • Extension cable for brushless DC motors and drives
    • Compatible with BL motors and BD drives
  • 3004-277

    Power Cable for SWM24, TXM24
    ,

    Product Features:

    • IP65 rated connector end
    • 4 pin A coded M12 connector to flying leads
    • Used to supply DC power to SWM24 & TXM24 models
    • Used for all SWM24 & TXM24 models
    • Shielded
  • 3004-278-5M

    RS-232 Cable for SWM24, TXM24, TXM34

    Product Features:

    • IP65 rated
    • 5 pin A coded M12 connector to DB-9F
    • 5 meters (16.4ft) long
    • Used to connect SWM24, TXM24 and TXM34 to PC
    • For use with SWM24, TXM24 and TXM34 models with RS-232 interface
    • Shielded
  • 3004-280

    Ethernet Cable for SWM / TXM
    ,

    Product Features:

    • IP65 rated
    • 4 pin D coded M12 connector to RJ45
    • Used to connect SWM24, TXM24 and TXM34 to Ethernet network
    • For use with SWM24, TXM24 and TXM34 Ethernet and EtherNet/IP models
  • 3004-288-5M

    RS-485 / CANopen cable for TXM24, 5 meters
    ,

    Product Features:

    • IP65 rated
    • 5 pin A coded M12 connector to flying leads
    • 5 meters (16.4ft) long
    • Used to connect TXM24 integrated StepSERVO™ to RS-485 or CAN network
    • Shielded
  • 3004-290

    I/O Cable for SWM24, TXM24
    ,

    Product Features:

    • IP65 rated connector end
    • 12 pin M12 connector to flying leads
    • Used to connect I/O on SWM24 & TXM24 models
    • Used for all SWM24 & TXM24 models
    • Shielded
  • 3004-294

    TSM RS-232 communication cable
    , ,

    Product Features:

    • 4 feet, 10 inches (1.5m) cable
    • 9-pin D-Sub to JST 4-pin connector
    • Used for setup, configuration, and programming
    • For RS-232 port on TSM series integrated StepSERVO™ motors
  • 3004-308-2M

    I/O cable for TSM-C/IP/Q/S, 2 meters, shielded
    ,

    Product Features:

    • This cable has been replaced by the 3004-318-2M
    • Used to connect I/O on select TSM17, TSM23 and TSM34 StepSERVO™ Integrated Motors
    • Shielded for increased noise immunity
    • 2 meters (6.56 ft) long
    • JST 28-pin female connector to flying leads
    • 25 AWG28 conductors plus drain wire
  • 3004-309-2M

    TSM-P shielded I/O cable, 2 m
    , ,

    Product Features:

    • JST 28-pin female connector to flying leads
    • 2 meters (6.56 ft) long
    • Used to connect I/O on TSM17P and TSM23P
    • Shielded twisted pair wire sets for increased noise immunity
  • 3004-310-1M

    TSM RS-485 daisy chain cable, 1 m
    ,

    Product Features:

    • JST 5-pin connector to JST 5-pin connector
    • 1 meter (3.28 ft) long
    • Used to connect two RS-485 TSM integrated motors together
    • For use with TSM models with RS-485 interface
    • Shielded
  • 3004-311-1M

    TSM CANopen daisy chain cable, 1 m
    ,

    Product Features:

    • JST 5-pin connector to JST 5-pin connector
    • 1 meter (3.28 ft) long
    • Used to network two TSM CANopen integrated StepSERVO™ motors
    • Shielded
  • 3004-313-1M

    TSM RS-485 / CANopen host cable, 1 m
    , ,

    Product Features:

    • JST 5-pin connector to flying leads
    • 1 meter (3.28 ft) long
    • Used to network TSM RS-485 or CANopen integrated StepSERVO™ motors to a host adapter
    • Shielded
  • 3004-314

    TSM to BOB-2 Breakout Board I/O cable, 1 meter
    ,

    Product Features:

    • JST 28-pin female connector to DB25 male connector
    • 1 meter (39.4 in) long
    • Used to connect I/O on TSM17S/Q/C/P and TSM23S/Q/C/P to BOB-2 screw terminal breakout board
    • Shielded for increased noise immunity
  • 3004-318-2M

    I/O cable for TSM-C/IP/Q/S, 2 meters, shielded
    ,

    Product Features:

    • Used to connect I/O on select TSM17, TSM23 and TSM34 StepSERVO™ Integrated Motors
    • Shielded for increased noise immunity
    • 2 meters (6.56 ft) long
    • JST 28-pin female connector to flying leads
    • 25 AWG28 conductors plus drain wire
  • 3004-319

    Spare Mating Cable for TSM11 StepSERVO™
    ,

    Product Features:

    • Wire harness for power, I/O, and communication
    • 12-pin JST connector to flying leads
    • Included with all TSM11 models
    • 300 mm length
  • 3004-327-2M

    I/O Extension Cable for SV200 Servo Drives

    Product Features:

    • Extension cable for I/O connector of SV200 servo drives
    • Mating connector one end, flying leads on other end
    • 2 meters long
    • Works with all SV200 servo drives
    • Shielded for increased noise immunity
  • 3004-331

    Power Cable for TXM34, angled M12

    Product Features:

    • IP65 rated cable
    • 4 pin S coded, angled M12 connector to flying leads
    • Used to connect main and auxiliary power to TXM34 integrated motors
    • Compatible with all TXM34 integrated motors
  • 3004-332

    Power Cable for TXM34, straight M12

    Product Features:

    • IP65 rated cable
    • 4 pin S coded, straight M12 connector to flying leads
    • Used to connect main and auxiliary power to TXM34 integrated motors
    • Compatible with all TXM34 integrated motors

Pages