1-800-525-1609 My Account #View Cart
HT34-497
1pc. - $518.00
50pc. - $388.50
View All Pricing NEMA 34 High Torque Step Motor
(click to enlarge)
Product Features
- 2-phase hybrid step motor
- High torque design
- Standard NEMA 34 dimensions
- Optimized for high bus voltage operation
Product Details
The HT34-497 two-phase stepper motor is designed for use with the STAC5 and STAC6 series of stepper drives and is suitable for a wide range of motion control applications. The motor is optimized for use with high bus-voltage drives and comes with an integral 10 ft shielded cable.
The motor is terminated with 8 motor leads plus 1 ground lead making it easy to connect the motor to the drive depending on the drive voltage being used. For 120 VAC applications the motor leads must be connected in parallel. For 220 VAC applications the motor leads must be connected in series.
Note: The HT34-497 step motor supersedes the HT34-490 step motor in 120 VAC applications with the STAC6 stepper drives.
Part Number
HT34-497
Frame Size
NEMA 34
Motor Type
High torque
Part Number w/Double Shaft
HT34-497D
Part Number w/Encoder
HT34-497D-YAA
Motor Length
6.14 inches
Number of Lead Wires
8
Lead Wire Configuration
shielded cable, no connector
Lead Wire/Cable Length
10 feet
Lead Wire Gauge
22 AWG
Unipolar Holding Torque
1198 oz-in
Bipolar Holding Torque
1694 oz-in
Step Angle
1.8 deg
Bipolar Series Current
2.55 A/phase
Bipolar Series Resistance
4.9 Ohms/phase
Bipolar Series Inductance
38.4 mH/phase
Bipolar Parallel Current
5.10 A/phase
Bipolar Parallel Resistance
1.2 Ohms/phase
Bipolar Parallel Inductance
9.6 mH/phase
Unipolar Current
3.61 A/phase
Unipolar Resistance
2.5 Ohms/phase
Unipolar Inductance
9.6 mH/phase
Rotor Inertia
6.80E-02 oz-in-sec2
Integral Gearhead
No
Weight
11.0 lbs
Storage Temperature
-40 to 70 °C
Operating Temperature
-20 to 50 °C
Insulation Class
Class B (130 ºC)
Maximum Radial Load
42 lbs
Maximum Thrust Load
33 (2.2 w/ encoder) lbs
Shaft Run Out
0.002 inch T.I.R. max
Radial Play
0.001 inch max w/ 1.1 lb load
End Play
0.003 inch max w/ 2.2 lb load
Perpendicularity
0.003 inches
Concentricity
0.003 inches
Datasheet
2D Drawing
3D Drawing
Speed-Torque Curves
Agency Approvals
There are no related agency approval documents at this time.
Application Notes
There are currently no Application Notes available for this product.
| HT34-497 Part Number w/ Single Shaft | HT34-497D Part Number w/ Double Shaft | HT34-497D-YAA Part Number w/ Encoder | |
|---|---|---|---|
| 1pc. | $518.00 | $518.00 | $668.00 |
| 25pc. | $445.48 | $445.48 | $574.48 |
| 50pc. | $388.50 | $388.50 | $501.00 |
| 100pc. | Contact us for 100+ piece pricing. | ||
