1-800-525-1609 My Account #View Cart
HT34-489
1pc. - $423.00
50pc. - $317.25
View All Pricing NEMA 34 High Torque Step Motor
(click to enlarge)
Product Features
- 2-phase hybrid step motor
- High torque design
- Standard NEMA 34 dimensions
- Optimized for high bus voltage operation
Product Details
The HT34-489 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications. The motor comes with an integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.
When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.
Note: The HT34-489 step motor has been superseded by the HT34-496 step motor for use in all new applications with STAC6 stepper drives.
Part Number
HT34-489
Frame Size
NEMA 34
Motor Type
High torque
Part Number w/Double Shaft
HT34-489D
Part Number w/Encoder
HT34-489D-YAA
Motor Length
4.63 inches
Number of Lead Wires
8
Lead Wire Configuration
shielded cable w/ connector
Lead Wire/Cable Length
10 feet
Lead Wire Gauge
22 AWG
Unipolar Holding Torque
785 oz-in
Bipolar Holding Torque
1110 oz-in
Step Angle
1.8 deg
Bipolar Series Current
4.10 A/phase
Bipolar Series Resistance
1.08 Ohms/phase
Bipolar Series Inductance
10.5 mH/phase
Bipolar Parallel Current
8.20 A/phase
Bipolar Parallel Resistance
0.27 Ohms/phase
Bipolar Parallel Inductance
2.63 mH/phase
Unipolar Current
5.80 A/phase
Unipolar Resistance
0.54 Ohms/phase
Unipolar Inductance
2.63 mH/phase
Rotor Inertia
4.53E-02 oz-in-sec2
Integral Gearhead
No
Weight
7.7 lbs
Storage Temperature
-40 to 70 °C
Operating Temperature
-20 to 50 °C
Insulation Class
Class B (130 ºC)
Maximum Radial Load
42 lbs
Maximum Thrust Load
33 (2.2 w/ encoder) lbs
Shaft Run Out
0.002 inch T.I.R. max
Radial Play
0.001 inch max w/ 1.1 lb load
End Play
0.003 inch max w/ 2.2 lb load
Perpendicularity
0.003 inches
Concentricity
0.003 inches
Datasheet
2D Drawing
3D Drawing
Speed-Torque Curves
Agency Approvals
There are no related agency approval documents at this time.
Application Notes
There are currently no Application Notes available for this product.
| HT34-489 Part Number w/ Single Shaft | HT34-489D Part Number w/ Double Shaft | HT34-489D-YAA Part Number w/ Encoder | |
|---|---|---|---|
| 1pc. | $423.00 | $423.00 | $573.00 |
| 25pc. | $363.78 | $363.78 | $492.78 |
| 50pc. | $317.25 | $317.25 | $429.75 |
| 100pc. | Contact us for 100+ piece pricing. | ||
