1-800-525-1609 My Account #View Cart
HT23-548
1pc. - $98.00
50pc. - $73.50
View All Pricing NEMA 23 High Torque Step Motor
(click to enlarge)
Product Features
- 2-phase hybrid step motor
- High torque design
- Standard NEMA 23 dimensions
- Optimized for high bus voltage
Product Details
The HT23-548 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications. The motor comes with an integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.
When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.
Note: The HT23-548 step motor has been superseded by the HT23-552 step motor for use in all new applications with STAC6 stepper drives.
Part Number
HT23-548
Frame Size
NEMA 23
Motor Type
High torque
Part Number w/Double Shaft
HT23-548D
Part Number w/Encoder
HT23-548D-ZAA
Motor Length
1.71 inches
Number of Lead Wires
8
Lead Wire Configuration
shielded cable w/ connector
Lead Wire/Cable Length
10 feet
Lead Wire Gauge
24 AWG
Unipolar Holding Torque
59.7 oz-in
Bipolar Holding Torque
84.4 oz-in
Step Angle
1.8 deg
Bipolar Series Current
1.41 A/phase
Bipolar Series Resistance
2.8 Ohms/phase
Bipolar Series Inductance
5.6 mH/phase
Bipolar Parallel Current
2.83 A/phase
Bipolar Parallel Resistance
0.7 Ohms/phase
Bipolar Parallel Inductance
1.4 mH/phase
Unipolar Current
2.00 A/phase
Unipolar Resistance
1.4 Ohms/phase
Unipolar Inductance
1.4 mH/phase
Rotor Inertia
1.70E-03 oz-in-sec2
Integral Gearhead
No
Weight
1.0 lbs
Storage Temperature
-40 to 70 °C
Operating Temperature
-20 to 50 °C
Insulation Class
Class B (130 ºC)
Maximum Radial Load
NA
Maximum Thrust Load
NA
Shaft Run Out
0.002 inch T.I.R. max
Radial Play
0.001 inch max w/ 1.0 lb load
End Play
0.003 inch max w/ 1.0 lb load
Perpendicularity
0.004 inches
Concentricity
0.003 inches
Datasheet
2D Drawing
3D Drawing
Speed-Torque Curves
Agency Approvals
There are no related agency approval documents at this time.
Application Notes
There are currently no Application Notes available for this product.
| HT23-548 Part Number w/ Single Shaft | HT23-548D Part Number w/ Double Shaft | HT23-548D-ZAA Part Number w/ Encoder | |
|---|---|---|---|
| 1pc. | $98.00 | $98.00 | $248.00 |
| 25pc. | $84.28 | $84.28 | $213.28 |
| 50pc. | $73.50 | $73.50 | $186.00 |
| 100pc. | Contact us for 100+ piece pricing. | ||
