- Products
- Stepper Drives
- Stepper Motors
- Integrated Steppers
- Servo Drives
- Servo Motors
- Gearheads
- Power Supplies
- Software
- Accessories
- Browse by Series
- News
- Support
- Company
- Contact
- Store
- News
Sales/Support 1-800-525-1609 | My Account | View Cart
Si3540
1pc. - $895.00
50pc. - $671.25
AC Microstep Drive w/ Si Programming
(click to enlarge)
Product Features
- Si Programmer™ compatible indexer/drive
- AC input 110V or 220V switch selectable, 50-60 Hz
- DC bus voltage 35 VDC full load, 40 VDC nominal
- Software selectable motor current from 0.2-3.5 amps/phase
- Software selectable microstep resolution and idle current reduction
- Eight optically isolated digital inputs
- Four optically isolated digital outputs
- RS-232 for PC/MMI communications
- Pluggable screw terminal connectors
- Dual MOSFET H-bridge, 3 state, pulse width modulated amplifier switching at 20-30 kHz
- Ideal for 4, 6 or 8 leaded step motors NEMA sizes 11, 14, 17 and 23
- Optional operator interface (MMI) allows users to enter specific motion parameters
- SCL mode for streaming serial commands from host controller
Product Details
The Si3540 is a programmable stepper drive/indexer packaged in a rugged steel case. Integral heat sink, mounting brackets, and mating connectors are included with each drive. The Si3540 is recommended for use with NEMA 11, 14, 17, and 23 frame motors and comes with all operating software necessary to create a complete stepper motion solution.
The Si3540 includes our Si Programmer™ software for quick set up and easy programming. Si programming is ideal for stand-alone operation. For more experienced users with software development expertise, the Si3540 also operates in SCL mode, which permits controlling the drive and motor by streaming serial commands from a host PC or PLC, thus allowing the user to command all drive functions from the host software application.
Multiple axis applications are handled by our SiNet™ Hub multi-axis controllers and the SiNet Hub Programmer™ software application, which give users the ability to control up to 8 drives from a single program. You can also use our MMI operator interface to allow machine operators to enter specific motion parameters.
Factory set for 110 VAC operation, the Si3540 can be set by the user for 220 VAC operation with a single switch. Pluggable screw terminal blocks are provided for I/O, motor, and AC power connections. Mating connectors, programming cable, and software are provided with each drive.
Model Number
Si3540
Part Number
5000-046
Supply Voltage
110/220 VAC
Supply Voltage Type
AC
Control Modes
- Streaming Commands
- Si Programming
- SiNet Hub Compatible
Output Current
0.2-3.5 A/phase
Communication Ports
- RS-232
Encoder Feedback
No
Step Resolution
- Microstepping
Idle Current Reduction
0, 25, 50 or 100%
Setup Method
Software setup
Digital Inputs
8
Digital Outputs
4
Analog Inputs
NA
Dimensions
7.8 x 5.0 x 2.25 inches
Weight
64 oz
Operating Temperature Range
0-70 °C
Ambient Temperature Range
0-50 °C
Ambient Humidity
90% max, non-condensing
Status LEDs
1 red (power)
Circuit Protection
NA
Manuals
Datasheet
2D Drawing
3D Drawing
Speed-Torque Curves
There are currently no Speed-Torque Curves documents available for this product.
Agency Approvals
There are no related agency approval documents at this time.
Application Notes
| Si3540 Part No. 5000-046 | |
|---|---|
| 1pc. | $895.00 |
| 25pc. | $769.70 |
| 50pc. | $671.25 |
| 100pc. | Contact us for 100+ piece pricing. |
