- Products
- Stepper Drives
- Stepper Motors
- Integrated Steppers
- Servo Drives
- Servo Motors
- Gearheads
- Power Supplies
- Software
- Accessories
- Browse by Series
- News
- Support
- Company
- Contact
- Store
- News
Sales/Support 1-800-525-1609 | My Account | View Cart
2035O
1pc. - $241.00
50pc. - $180.75
DC Full/Half Step Drive w/ Oscillator
(click to enlarge)
Product Features
- On-board oscillator
- Full & half step
- Idle current reduction
- Screw terminal connectors
- Dip switch setup
- Analog speed adjustment
- Tach output
- Enable input (inhibit)
- Optically isolated inputs
Product Details
The 2035O step motor driver is a full or half step drive, step phase sequencer with three state switching amplifiers and optoisolated circuits. This drive has a built in ramping pulse generator (oscillator) with adjustable speed, acceleration and deceleration. Oscillator speed range is 0-5,000 Hz. Speed can be set from on-board trimpot or external pot.
A jumper allows you to select the internal oscillator. In oscillator mode, the pulse input becomes a run/stop signal: when this signal is set high, the motor accelerates to a preset speed and slews. Lowering the input signal causes the drive to decelerate to rest.
The amplifier regulates motor current by chopping at a constant, inaudible frequency. Phase current is selected from 16 levels by a DIP switch.
Model Number
2035O
Part Number
1000-055
Supply Voltage
12-35 VDC
Supply Voltage Type
DC
Control Modes
- Step & Direction
- Velocity (Oscillator)
Output Current
0.125-2.0 A/phase
Communication Ports
NA
Encoder Feedback
No
Step Resolution
- Full
- Half
Idle Current Reduction
50%
Setup Method
Switch / potentiometer
Digital Inputs
3
Digital Outputs
1
Analog Inputs
1
Dimensions
4.0 x 3.0 x 1.5 inches
Weight
9 oz
Operating Temperature Range
0-70 °C
Ambient Temperature Range
0-50 °C
Ambient Humidity
90% max, non-condensing
Status LEDs
1 red (power)
Circuit Protection
NA
Software Downloads
There is no software related to this product.
Sample Code
There are no sample code documents at this time.
Manuals
Datasheet
2D Drawing
3D Drawing
Speed-Torque Curves
There are currently no Speed-Torque Curves documents available for this product.
Agency Approvals
Application Notes
There are currently no Application Notes available for this product.
| 2035O Part No. 1000-055 | |
|---|---|
| 1pc. | $241.00 |
| 25pc. | $207.26 |
| 50pc. | $180.75 |
| 100pc. | Contact us for 100+ piece pricing. |
