Software Downloads

Showing all available Software Downloads:

  • Si Programmer™

    Create Stand-Alone Indexing Programs for i and Si Drives

    Product Features:

    • Single-axis indexing
    • Easy to use
    • Intuitive
    • Functional
    • Point-and-click programming

    Intended for use in stand-alone applications, Si Programmer™ provides quick and easy programming with an extremely friendly, point-and-click interface that does not require any software programming experience. Si Programmer™ works with both stepper and servo drives.

    Learn More...

    System Requirements:

    Microsoft Windows 7, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • ST Configurator™

    Configure all ST, STAC and STM stepper products

    Product Features:

    • Intuitive interface
    • Supports all ST and STAC stepper drives
    • Supports all STM integrated steppers
    • Drive status and alarm monitoring
    • Self-test function to test drive/motor operation

    ST Configurator™ version 3.2 is now available, and provides seamless communication with all models whether they have RS-232, RS-485, CANopen or Ethernet communications. It also includes a built-in Q Programmer™ so you can switch context quickly and easily.

    Learn More...

    System Requirements:

    Microsoft Windows 7 and 8, Vista, XP, 32-bit or 64-bit

  • Step Servo Quick Tuner

    Configure, tune and program step servo products

    Product Features:

    . .

    • Drive configuration
    • Servo tuning
    • Built-in Q programming
    • Diagnostics

    All-in-one tuning, configuration and programming software for step servo drives.

    Learn More...

    System Requirements:

    Windows XP, Vista, 7 or 8. 32 or 64 bits. .Net Framework 2.0 required.

  • Quick Tuner™

    Tune and Configure Servo Drives

    Product Features:

    • Servo loop tuning and drive setup
    • Works with all Applied Motion servo drives
    • Built-in oscilloscope
    • Preloaded with tuning files for all Applied Motion servo motors

    Quick Tuner™ is Applied Motion’s servo tuning and configuration tool, used to setup and tune all Applied Motion servo drives.

    Learn More...

    System Requirements:

    Microsoft Windows 7, 8, Vista or XP, 32-bit or 64-bit

  • Q Programmer™

    Create Single-Axis Motion Control Programs for Q and Plus Drives

    Product Features:

    • Single-axis motion control
    • Stored program execution
    • Multi-tasking
    • Conditional processing
    • Math functions
    • Data registers

    Q Programmer™ is a single-axis motion control software for programmable stepper and servo drives from Applied Motion Products. The software allows users to create sophisticated and functional programs that Q and Plus drives can run stand-alone.

    Learn More...

    System Requirements:

    Microsoft Windows 7, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • SCL Utility

    Terminal Utility for Streaming Serial Commands

    Product Features:

    • Stream SCL commands from the command line
    • Simple interface
    • Works with all RS-232, RS-485, and Ethernet ports
    • Write and save SCL command scripts

    If you plan to stream serial commands to an Applied Motion Products drive using the Serial Command Language (SCL), you’ll need a simple terminal emulator to get familiar with and test your command strings. SCL Utility is the ideal choice because it sends command strings as a packet, with minimal delay between characters, and properly terminated with a carriage return.

    Learn More...

    System Requirements:

    Microsoft Windows 7, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • SiNet Hub Programmer™

    Si Programming for Multiple Drives

    Product Features:

    • Multi-axis indexing
    • Based on popular Si Programmer™ software
    • Easy to use
    • Intuitive
    • Functional
    • Point-and-click programming

    If you’re already familiar with Si Programmer™ and want to move to multi-axis control, SiNet Hub Programmer™ and one of the SiNet™ Hubs may be the right solution. SiNet Hub Programmer™ takes the familiar interface of the single-axis Si Programmer™ software and augments it to handle up to 4 or 8 axes, depending on whether you use it with the Hub 444 or Hub 8, respectively.

    Learn More...

    System Requirements:

    Microsoft Windows 8, 7, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • eXposition™

    Configure 2035XD Stepper Drives

    Product Features:

    • Used with 2035XD stepper drives
    • Also supports legacy “BL” servo drives

    If you’re using a 2035XD stepper drive, or a legacy servo drive like the BL7080x or BLx7080, you’ll need eXposition™ to configure your drive.

    Learn More...

    System Requirements:

    Microsoft Windows 7, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • ARM Firmware Downloader

    Download ARM Firmware to Ethernet Drives

    Product Features:

    • Works will all Ethernet and EtherNet/IP step and servo drives
    • Simple interface

    The ARM Firmware Downloader utility can be used to upgrade firmware in the Ethernet module of step and servo drives.

    Learn More...

    System Requirements:

    Microsoft Windows 7, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

  • DSP Firmware Downloader

    Download DSP Firmware to Step and Servo Drives

    Product Features:

    • Works with all DSP-based stepper drives, integrated steppers, and servo drives
    • Simple interface

    The DSP Firmware Downloader utility can be used, along with a serial programming cable and a separate firmware file available from Applied Motion, to upgrade firmware in DSP-based drives.

    Learn More...

    System Requirements:

    Microsoft Windows 7, Vista, XP, NT, 2000, ME, or 98, 32-bit or 64-bit

Pages