Call us at 1-800-525-1609
Software Downloads
Showing all available Software Downloads:
-
Si Programmer™
Create Stand-Alone Indexing Programs for i and Si DrivesProduct Features:
- Single-axis indexing
- Easy to use
- Intuitive
- Functional
- Point-and-click programming
Intended for use in stand-alone applications, Si Programmer™ provides quick and easy programming with an extremely friendly, point-and-click interface that does not require any software programming experience. Si Programmer™ works with both stepper and servo drives.
To find the right stepper or servo drive for your application, visit the browse pages below and filter on Control Mode = Si Programming.
Browse pages: Stepper Drives, Servo Drives
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
Q Programmer™
Create Single-Axis Motion Control Programs for Q and Plus DrivesProduct Features:
- Single-axis motion control
- Stored program execution
- Multi-tasking
- Conditional processing
- Math functions
- Data registers
Q Programmer™ is a single-axis motion control software for programmable stepper and servo drives from Applied Motion Products. The software allows users to create sophisticated and functional programs that Q and Plus drives can run stand-alone. The commands available in the Q programming environment consist of commands for controlling motion, inputs & outputs, drive configuration and status, as well as math operations, register manipulation, and multi-tasking.
To find the right drive for your application, visit the browse pages below and filter on Control Mode = Q Programming.
Browse pages: Stepper Drives, Integrated Steppers, Servo Drives
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
ST Configurator™
Configure ST Stepper Drives and STM Integrated SteppersProduct Features:
- Intuitive interface
- Supports all ST and STM products
- Drive status and alarm monitoring
- Self-test function to test drive/motor operation
The ST Configurator™ software makes setting up and configuring ST stepper drives and STM integrated steppers a snap. All motor, I/O, motion control mode, and encoder parameters are available to the user through an intuitive interface.
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
STAC6 Configurator™
Configure STAC6 Stepper DrivesProduct Features:
- Intuitive interface
- Supports all STAC6 stepper drives
- Drive status and alarm monitoring
- Self-test function to test drive/motor operation
The STAC6 Configurator™ software makes setting up and configuring STAC6 stepper drives a snap. All motor, I/O, motion control mode, and encoder parameters are available to the user through an intuitive interface.
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
Quick Tuner™
Tune and Configure Servo DrivesProduct Features:
- Servo loop tuning and drive setup
- Works with all Applied Motion servo drives
- Built-in oscilloscope
- Preloaded with tuning files for all Applied Motion servo motors
Quick Tuner™ is Applied Motion’s servo tuning and configuration tool, used to setup and tune all Applied Motion servo drives. Quick Tuner™ comes with a built-in sampling oscilloscope, status and alarm monitoring, preloaded tuning files for easy setup of all Applied Motion motors, and support for all tuning parameters including proportional, integral, and derivative gains, velocity feedback, velocity feedforward, acceleration feedforward, a PID output filter, a derivative filter, and a jerk filter (S-curve).
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
SiNet Hub Programmer™
Si Programming for Multiple DrivesProduct Features:
- Multi-axis indexing
- Based on popular Si Programmer™ software
- Easy to use
- Intuitive
- Functional
- Point-and-click programming
If you’re already familiar with Si Programmer™ and want to move to multi-axis control, SiNet Hub Programmer™ and one of the SiNet™ Hubs may be the right solution. SiNet Hub Programmer™ takes the familiar interface of the single-axis Si Programmer™ software and augments it to handle up to 4 or 8 axes, depending on whether you use it with the Hub 444 or Hub 8, respectively.
All of the familiar Si programming instructions are included, plus support for starting multiple axes at the same time, delaying the start of multiple axes at different time intervals, sharing I/O between axes, using one operator interface (MMI) for all axes, and more.
To find the right drives for your application, visit the browse pages below and select Control Mode = SiNet Hub Compatible.
Browse pages: Stepper Drives, Integrated Steppers, Servo Drives
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
SCL Utility
Terminal Utility for Streaming Serial CommandsProduct Features:
- Stream SCL commands from the command line
- Simple interface
- Works with all RS-232, RS-485, and Ethernet ports
- Write and save SCL command scripts
If you plan to stream serial commands to an Applied Motion Products drive using the Serial Command Language (SCL), you’ll need a simple terminal emulator to get familiar with and test your command strings. SCL Utility is the ideal choice because it sends command strings as a packet, with minimal delay between characters, and properly terminated with a carriage return. Other terminal applications send each character as it’s typed, making them difficult to use with SCL commands.
SCL Utility works with all drives that operate in the streaming commands control mode, whether each drive has an RS-232, RS-485, or Ethernet port. SCL Utility also works with the SiNet™ Hubs, when the Hubs are configured to be used as RS-232 routers.
To find the right drive for your application, visit the browse pages below and filter on Control Mode = Streaming Commands.
Browse pages: Stepper Drives, Integrated Steppers, Servo Drives
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
eXposition™
Configure 2035XD Stepper DrivesProduct Features:
- Used with 2035XD stepper drives
- Also supports legacy “BL” servo drives
If you’re using a 2035XD stepper drive, or a legacy servo drive like the BL7080x or BLx7080, you’ll need eXposition™ to configure your drive.
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
DSP Firmware Downloader
Download DSP Firmware to Step and Servo DrivesProduct Features:
- Works with all DSP-based stepper drives, integrated steppers, and servo drives
- Simple interface
The DSP Firmware Downloader utility can be used, along with a serial programming cable and a separate firmware file available from Applied Motion, to upgrade firmware in DSP-based drives. Detailed instructions on using the DSP Firmware Downloader are available in the support section. Firmware files are available from technical support by calling 1-800-525-1609.
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
-
Si Firmware Downloader
Download Si Firmware to Si DrivesProduct Features:
- Works with most Si stepper and servo drives
- Simple interface
The Si Firmware Downloader utility can be used, along with a serial programming cable and a separate firmware file available from Applied Motion, to upgrade firmware in most Si drives. Detailed instructions on using the Si Firmware Downloader are available in the support section. Firmware files are available from technical support by calling 1-800-525-1609.
System Requirements:
Microsoft Windows 98, ME, 2000, NT, XP, Vista, or 7
