You are here

Videos

  • IP65 Step Motor - Rain Simulation Test

    Sep
    05

    Applied Motion Products is pleased to announce the addition of NEMA size 23, 24 and 34 stepper motors with IP65 ratings for operation in severe environmental conditions. These new models, dust proof and resistant to low pressure water jets, are ideal for applications in wet factory environments such as the food and beverage industry or outdoor use.

  • Encoder Feedback in Step Motor Systems

    Jun
    22

    Applied Motion Products offer closed loop control features on all of our stepper drives, motors, and integrated products by utilizing incremental quadrature encoders mounted to the rear shaft of the step motor. Stepper drives with encoder feedback connectors can be married to double-shaft step motors with encoders pre-assembled for you. Integrated steppers are available with encoders built directly into the housing of the motor.

    Adding an encoder to your stepper system greatly enhances performance by providing you with these closed-loop functions: Stall Detection and Stall Prevention.

  • ST Stepper Drives with Ethernet, Part 1

    Jan
    26

    The ST series step motor drives come with a variety of communication options including RS-232, RS-485, CANopen, and now Ethernet.

    Part 1 of 3 provides an overview of the ST series stepper drives, the connectors on the Ethernet version, and how to download software from our website.

    Part 1 | Part 2 | Part 3

  • ST Stepper Drives with Ethernet, Part 2

    Jan
    26

    The ST series step motor drives come with a variety of communication options including RS-232, RS-485, CANopen, and now Ethernet.

    Part 2 of 3 shows where to download hardware manuals from our website, how to wire a step motor and power supply to the drive, and how to connect the drive to an Ethernet network.

    Part 1 | Part 2 | Part 3

  • ST Stepper Drives with Ethernet, Part 3

    Jan
    26

    The ST series step motor drives come with a variety of communication options including RS-232, RS-485, CANopen, and now Ethernet.

    Part 3 of 3 shows how to configure the drive using the ST Configurator™ software and how to create a simple indexing program with the Q Programmer™ software.

Pages