You are here
Accessories in: Cables
Showing all accessories in the selected category.
-
3004-354
Servo Motor Power Cable, flex rated, more than 6A (SV200 drives)
, 
Product Features
- Compatible with J Series servo motors with more than 6A rated current
- Flex rated cable
- Compatible with SV2Dx servo drives
- AMP plastic connector on motor end
- Flying leads on drive end
-
3004-355
Servo Motor Power Cable, more than 6A (SV200 drives)
, 
Product Features
- Compatible with J Series servo motors with more than 6A rated current
- Compatible with SV2Dx servo drives
- AMP plastic connector on motor end
- Flying leads on drive end
-
3004-358
Power and I/O Cable for TSM11-H01 integrated motors
, 
Product Features
- For use with TSM11Q-xRM-H01 StepSERVO™ Integrated Motors with enhanced daisy-chain connectors
- Wire harness for power and I/O
- 10-pin JST connector to flying leads
- 300 mm length
-
3004-362-01
BAA Encoder Extension Cable with flying leads, 1ft, Unshielded
Product Features
- Compatible with BAA encoders
- 5 Pin connector on encoder end
- Flying leads on other end
-
3004-363-06
BAA Encoder Extension Cable with flying leads, 6ft, Shielded
Product Features
- Compatible with BAA encoders
- 5 Pin connector on encoder end
- Flying leads on other end
-
3004-382
M12 termination resistor (female)
, 
Product Features
- This is used for TXM24xB, TXM34 and MDXL products
- 3004-382 is recommended for RS-485 network with more than 10 axis, and CANopen network.
- A coded, 120ohm between Pin 4 and 5.
-
3004-384
Daisy-Chain cable, RS-485 & CANopen, straight M12 to straight M12
Product Features
- Easily extend the RS-485 or CANopen network from one integrated motor to the next
- Works with all integrated motors that have M12 connectors for RS-485 and CANopen connections
- Straight M12 connector on each end
-
3004-385
Daisy-Chain cable, RS-485 & CANopen, angled M12 to angled M12
Product Features
- Easily extend the RS-485 or CANopen network from one integrated motor to the next
- Works with all integrated motors that have M12 connectors for RS-485 and CANopen connections
- Right-angle M12 connector on each end
-
3004-389
M12 Plug and Cap Kit
, 
, 
, 
Product Features
- Kit includes 3 plugs and 1 cap for unused M12 connectors on MDX, TXM, and SWM integrated motors
- Designed to maintain the IP65 rating of the integrated motor when one or more connectors are unused
-
3004-398
I/O cable for TSM23X/STM23X w/ Ethernet
Product Features
- Used to connect I/O on TSM23X and STM23X StepSERVO™ Integrated Motors with Ethernet/IP
- Shielded for increased noise immunity
- Available in multiple lengths
- JST 18-pin female connector to flying leads
- 25 AWG28 conductors plus drain wire
-
3004-403
StepSERVO Motor Power Cable for SSDC series Drive
Product Features
- For use with HT-SS StepSERVO Motors
- Compatible with motor frame sizes NEMA 17, 23, 24 and 34
- Extends connection between motor phases and a compatible SSDC StepSERVO Drive
- AMP mating plastic connector on both end
-
3004-408
StepSERVO Motor Power Cable for SSDC Series Drive
Product Features
- For use with HT-SS StepSERVO Motors
- Compatible with motor frame size NEMA 11
- Extends connection between motor phases and a compatible SSDC StepSERVO Drive
- AMP mating plastic connector on both end
-
3004-416-3M
Ethernet cable, RJ45 to M12 8-position X-coded
Product Features
- Ethernet cable for TSM14POE series with M12 connector
- 8-position X-coded M12 male circular connector to RJ45
- 3 meter length
-
8500-003
USB-Serial Adapter for RS-232/422/485 Ports
Product Features
- Convert USB to serial
- 9-pin RS-232 port
- 6-pin RS-422/485 screw terminal connector
- Dip-switch setup
- Port-powered: no external power supply required
- 3 ft. USB extension cable and software CD included
-
8500-005
Daisy Chain Connector Board for TSM11
, 
Product Features
- Compatible with TSM11Q-xRM StepSERVO Integrated Motors
- Separate connectors for power and I/O, and communications
- RS-485 daisy chain connectivity
- Sourcing output connections
- 10-pin power & I/O connector
- 5-pin RS-485 connectors
-
BLUENC-CA-04
Servo Motor Feedback Cable, 4 ft
Product Features
- Compatible with all M series servo motors
- Compatible with all servo drives
- Circular plastic connector (CPC) on motor end
- High-density 15-pin D-Sub connector on drive end
-
BLUENC-CA-10
Servo Motor Feedback Cable, 10 ft
Product Features
- Compatible with all M series servo motors
- Compatible with all servo drives
- Circular plastic connector (CPC) on motor end
- High-density 15-pin D-Sub connector on drive end
-
BLUENC-CA-20
Servo Motor Feedback Cable, 20 ft
Product Features
- Compatible with all M series servo motors
- Compatible with all servo drives
- Circular plastic connector (CPC) on motor end
- High-density 15-pin D-Sub connector on drive end
-
BLUMTR-BK-CA-04
Servo Motor Power Cable, 4 ft
Product Features
- Compatible with M Series servo motors w/ integral holding brakes
- Compatible with DC-powered servo drives, such as SV7, BLuDC9, and BLuDC4
- Circular plastic connector (CPC) on motor end
- Flying leads on drive end
-
BLUMTR-BK-CA-10
Servo Motor Power Cable, 10 ft
Product Features
- Compatible with M Series servo motors w/ integral holding brakes
- Compatible with DC-powered servo drives, such as SV7, BLuDC9, and BLuDC4
- Circular plastic connector (CPC) on motor end
- Flying leads on drive end
-
BLUMTR-BK-CA-20
Servo Motor Power Cable, 20 ft
Product Features
- Compatible with M Series servo motors w/ integral holding brakes
- Compatible with DC-powered servo drives, such as SV7, BLuDC9, and BLuDC4
- Circular plastic connector (CPC) on motor end
- Flying leads on drive end
-
BLUMTR-BK-FA-04
Servo Motor Power Cable, 4 ft
Product Features
- Compatible with M series servo motors w/ integral holding brakes
- Compatible with AC-powered servo drives, such as BLuAC5
- Circular plastic connector (CPC) on motor end
- Flying leads on drive end
-
BLUMTR-BK-FA-10
Servo Motor Power Cable, 10 ft
Product Features
- Compatible with M series servo motors w/ integral holding brakes
- Compatible with AC-powered servo drives, such as BLuAC5
- Circular plastic connector (CPC) on motor end
- Flying leads on drive end
-
BLUMTR-BK-FA-20
Servo Motor Power Cable, 20 ft
Product Features
- Compatible with M series servo motors w/ integral holding brakes
- Compatible with AC-powered servo drives, such as BLuAC5
- Circular plastic connector (CPC) on motor end
- Flying leads on drive end
-
BLUMTR-CA-04
Servo Motor Power Cable, 4 ft
Product Features
- Compatible with M series servo motors (w/o integral holding brakes)
- Compatible with DC-powered servo drives, such as SV7, BLuDC9, and BLuDC4
- Circular plastic connector (CPC) on motor end
- Flying leads on drive end