You are here
Accessories in: Cables
Showing all accessories in the selected category.
-
3004-308-2M
I/O cable for TSM-C/IP/Q/S, 2 meters, shielded
, 
Product Features
- This cable has been replaced by the 3004-318-2M
- Used to connect I/O on select TSM17, TSM23 and TSM34 StepSERVO™ Integrated Motors
- Shielded for increased noise immunity
- 2 meters (6.56 ft) long
- JST 28-pin female connector to flying leads
- 25 AWG28 conductors plus drain wire
-
3004-309-2M
TSM-P shielded I/O cable, 2 m
, 
, 
Product Features
- JST 28-pin female connector to flying leads
- 2 meters (6.56 ft) long
- Used to connect I/O on TSM17P and TSM23P
- Shielded twisted pair wire sets for increased noise immunity
-
3004-310
RS-485 & CANopen daisy chain cable for TSM & MDXK
, 
Product Features
- For use with TSM StepSERVO integrated motors and MDXK integrated Servo with RS-485 and CANopen communications
- Used to connect the RS-485 communication ports of two TSM StepSERVO integrated motors
- JST 5-pin connector to JST 5-pin connector
- 1 meter (3.28 ft) and 5 meter (16.4 ft) lengths available
- Shielded
-
3004-311-1M
TSM CANopen daisy chain cable, 1 m
, 
Product Features
- JST 5-pin connector to JST 5-pin connector
- 1 meter (3.28 ft) long
- Used to network two TSM CANopen integrated StepSERVO™ motors
- Shielded
-
3004-313-1M
RS-485 / CANopen host cable for TSM and MDXK, 1 m
, 
, 
Product Features
- Used for configuration and communications between a TSM StepSERVO™ integrated motor and MDX Integrated Servo series
- Works with TSM and MDXK integrated motors with RS-485 or CANopen communications
- JST 5-pin connector to flying leads
- 1 meter (3.28 ft) long
- Shielded
-
3004-314
TSM to BOB-2 Breakout Board I/O cable, 1 meter
, 
Product Features
- JST 28-pin female connector to DB25 male connector
- 1 meter (39.4 in) long
- Used to connect I/O on TSM17S/Q/C/P and TSM23S/Q/C/P to BOB-2 screw terminal breakout board
- Shielded for increased noise immunity
-
3004-318
I/O cable for TSM-C/IP/Q/S and MDXK, shielded,
Product Features
- Used to connect I/O on select TSM17, TSM23 and TSM34 StepSERVO™ Integrated Motors and MDX Integrated Servo Motors
- Shielded for increased noise immunity
- Available in multiple lengths
- JST 28-pin female connector to flying leads
- 25 AWG28 conductors plus drain wire
-
3004-319
Spare Mating Cable for TSM11
, 
Product Features
- Wire harness for power, I/O, and communication
- 12-pin JST connector to flying leads
- Included with all standard TSM11 StepSERVO integrated motors
- 300 mm length
-
3004-327-2M
I/O Extension Cable for SV200 Servo Drives
Product Features
- Extension cable for I/O connector of SV200 servo drives
- Mating connector one end, flying leads on other end
- 2 meters long
- Works with all SV200 servo drives
- Shielded for increased noise immunity
-
3004-329-10
CAA Encoder Extension Cable, 10 ft
, 
, 
Product Features
- Compatible with CAA encoders
- 17 Pin JAE connector on encoder end
- High-density 15-pin D-sub on drive end
-
3004-331
Power Cable, angled M12 to flying leads
Product Features
- IP65 rated cable
- 4-pin, S-coded, angled M12 connector at motor
- Flying leads for easy wiring into power supply
- Used to connect main and auxiliary power to TXM34 and MDX integrated motors
- Compatible with all TXM34 and MDX integrated motors
-
3004-332
Power Cable, straight M12 to flying leads
Product Features
- IP65 rated cable
- 4-pin, S-coded, straight M12 connector at motor
- Flying leads for easy wiring into power supply
- Used to connect main and auxiliary power to TXM34 and MDX integrated motors
- Compatible with all TXM34 and MDX integrated motors
-
3004-333
I/O Cable, angled M12 to flying leads
Product Features
- IP65 rated cable
- 17-pin, A-coded, angled M12 connector at motor
- Flying leads for easy wiring to terminal blocks
- Used to connect input and output (I/O) signals of TXM34 and MDX integrated motors
- Compatible with all TXM34 and MDX integrated motors
-
3004-334
I/O Cable, straight M12 to flying leads
Product Features
- IP65 rated cable
- 17-pin, A-coded, straight M12 connector at motor
- Flying leads for easy wiring to terminal blocks
- Used to connect input and output (I/O) signals of TXM34 and MDX integrated motors
- Compatible with all TXM34 and MDX integrated motors
-
3004-335
Daisy-Chain Cable, Ethernet, straight M12 to straight M12
Product Features
- Easily extend Ethernet network from one motor to the next
- Straight M12, D-coded Ethernet connector on each end
- Works with all MDX, SWM and TXM integrated motors with dual-port Ethernet connections
-
3004-336
StepSERVO Motor Power Cable for SS-EC drive
Product Features
- For use with HT-SS StepSERVO Motors
- Compatible with motor frame sizes NEMA 17, 23, 24 and 34
- Extends connection between motor phases and a compatible SS-EC StepSERVO Drive
- AMP mating plastic connector on motor end
- Flying leads on drive end
-
3004-337
StepSERVO Motor Power Cable for SS-EC drive
Product Features
- For use with HT-SS StepSERVO Motors
- Compatible with motor frame size NEMA 11
- Extends connection between motor phases and a compatible SS-EC StepSERVO Drive
- AMP mating plastic connector on motor end
- Flying leads on drive end
-
3004-338
StepSERVO Motor Feedback Cable, 1 meter
Product Features
- For use with HT-SS StepSERVO Motors
- Compatible with motor frame sizes NEMA 17, 23, 24 and 34
- Extends connection between motor feedback and a compatible SS StepSERVO Drive
- AMP mating plastic connector on motor end
- AMP mating plastic connector on drive end
-
3004-339
StepSERVO Motor Feedback Cable
Product Features
- For use with HT-SS StepSERVO Motors
- Compatible with motor frame size NEMA 11
- Extends connection between motor feedback and a compatible SS StepSERVO Drive
- AMP mating plastic connector on motor end
- AMP mating plastic connector on drive end
-
3004-340-2M
I/O Cable for SS StepSERVO Drives
Product Features
- Used to connect I/O on SS StepSERVO Drives
- Shielded, twisted pair cable
- 2 meters long
- 32 pin connector to flying leads
-
3004-345
Daisy-Chain Cable, Ethernet, angled M12 to angled M12
Product Features
- Easily extend Ethernet network from one motor to the next
- Angled M12, D-coded Ethernet connector on each end
- Works with all MDX, SWM and TXM integrated motors with dual-port Ethernet connections
-
3004-348
I/O cable for STF drives
, 
Product Features
- Used to connect I/O on STF03, STF06, STF10 drives
- Shielded for increased noise immunity
- Available in multiple lengths
- Molex 20-pin female connector to flying leads
-
3004-349
CAA Encoder Extension Cable with flying leads
, 
Product Features
- Compatible with CAA encoders
- 17 Pin JAE connector on encoder end
- Flying leads on other end
-
3004-352
Servo Motor Power Cable, 6A or less (SV200 drives)
, 
Product Features
- Compatible with J Series servo motors with 6A or less rated current
- Compatible with SV2Dx servo drives
- AMP plastic connector on motor end
- Flying leads on drive end
-
3004-353
Servo Motor Power Cable, flex rated, 6A or less (SV200 drives)
, 
Product Features
- Compatible with J Series servo motors with 6A or less rated current
- Flex rated
- Compatible with SV2Dx servo drives
- AMP plastic connector on motor end
- Flying leads on drive end