You are here
Accessories in: Cables, Communication & I/O Cables
Showing all accessories in the selected category.
-
3004-334
I/O Cable, straight M12 to flying leads
Product Features
- IP65 rated cable
- 17-pin, A-coded, straight M12 connector at motor
- Flying leads for easy wiring to terminal blocks
- Used to connect input and output (I/O) signals of TXM34 and MDX integrated motors
- Compatible with all TXM34 and MDX integrated motors
-
3004-335
Daisy-Chain Cable, Ethernet, straight M12 to straight M12
Product Features
- Easily extend Ethernet network from one motor to the next
- Straight M12, D-coded Ethernet connector on each end
- Works with all MDX, SWM and TXM integrated motors with dual-port Ethernet connections
-
3004-340-2M
I/O Cable for SS StepSERVO Drives
Product Features
- Used to connect I/O on SS StepSERVO Drives
- Shielded, twisted pair cable
- 2 meters long
- 32 pin connector to flying leads
-
3004-345
Daisy-Chain Cable, Ethernet, angled M12 to angled M12
Product Features
*Not available for online purchase. Contact for more information*
- Easily extend Ethernet network from one motor to the next
- Angled M12, D-coded Ethernet connector on each end
- Works with all MDX, SWM and TXM integrated motors with dual-port Ethernet connections
-
3004-348
I/O cable for STF drives
, 
Product Features
- Used to connect I/O on STF03, STF06, STF10 drives
- Shielded for increased noise immunity
- Available in multiple lengths
- Molex 20-pin female connector to flying leads
-
3004-349
CAA Encoder Extension Cable with flying leads
, 
Product Features
- Compatible with CAA encoders
- 17 Pin JAE connector on encoder end
- Flying leads on other end
-
3004-358
Power and I/O Cable for TSM11-H01 integrated motors
, 
Product Features
- For use with TSM11Q-xRM-H01 StepSERVO™ Integrated Motors with enhanced daisy-chain connectors
- Wire harness for power and I/O
- 10-pin JST connector to flying leads
- 300 mm length
-
3004-362-01
BAA Encoder Extension Cable with flying leads, 1ft, Unshielded
Product Features
- Compatible with BAA encoders
- 5 Pin connector on encoder end
- Flying leads on other end
-
3004-363-06
BAA Encoder Extension Cable with flying leads, 6ft, Shielded
Product Features
- Compatible with BAA encoders
- 5 Pin connector on encoder end
- Flying leads on other end
-
3004-382
M12 termination resistor (female)
, 
Product Features
- This is used for TXM24xB, TXM34 and MDXL products
- 3004-382 is recommended for RS-485 network with more than 10 axis, and CANopen network.
- A coded, 120ohm between Pin 4 and 5.
-
3004-384
Daisy-Chain cable, RS-485 & CANopen, straight M12 to straight M12
Product Features
- Easily extend the RS-485 or CANopen network from one integrated motor to the next
- Works with all integrated motors that have M12 connectors for RS-485 and CANopen connections
- Straight M12 connector on each end
-
3004-385
Daisy-Chain cable, RS-485 & CANopen, angled M12 to angled M12
Product Features
- Easily extend the RS-485 or CANopen network from one integrated motor to the next
- Works with all integrated motors that have M12 connectors for RS-485 and CANopen connections
- Right-angle M12 connector on each end
-
3004-389
M12 Plug and Cap Kit
, 
, 
, 
Product Features
- Kit includes 3 plugs and 1 cap for unused M12 connectors on MDX, TXM, and SWM integrated motors
- Designed to maintain the IP65 rating of the integrated motor when one or more connectors are unused
-
3004-398
I/O cable for TSM23X/STM23X w/ Ethernet
Product Features
- Used to connect I/O on TSM23X and STM23X StepSERVO™ Integrated Motors with Ethernet/IP
- Shielded for increased noise immunity
- Available in multiple lengths
- JST 18-pin female connector to flying leads
- 25 AWG28 conductors plus drain wire
-
3004-416-3M
Ethernet cable, RJ45 to M12 8-position X-coded
Product Features
*Not available for online purchase. Lead time: 30 weeks. Contact for more information*
- Ethernet cable for TSM14POE series with M12 connector
- 8-position X-coded M12 male circular connector to RJ45
- 3 meter length
-
8500-003
USB-Serial Adapter for RS-232/422/485 Ports
Product Features
- Convert USB to serial
- 9-pin RS-232 port
- 6-pin RS-422/485 screw terminal connector
- Dip-switch setup
- Port-powered: no external power supply required
- 3 ft. USB extension cable and software CD included
-
8500-005
Daisy Chain Connector Board for TSM11
, 
Product Features
- Compatible with TSM11Q-xRM StepSERVO Integrated Motors
- Separate connectors for power and I/O, and communications
- RS-485 daisy chain connectivity
- Sourcing output connections
- 10-pin power & I/O connector
- 5-pin RS-485 connectors
-
BOB-1
Breakout Board for 25-pin D-Sub Connectors
Product Features
- Convert a drive’s female 25-pin D-sub connector to screw terminals
- Din-rail mountable
- 3 ft extension cable included
-
BOB-2
Breakout Board for 25-pin D-Sub Connectors
Product Features
- Convert a drive’s male 25-pin D-sub connector to screw terminals
- Din-rail mountable
- 3 ft extension cable included
- To use the BOB-2 with TSM StepSERVO™ products, please purchase cable 3004-314
-
BOB-4
Breakout Board for SV200 I/O Connector
, 
, 
Product Features
- Convert a SV200 servo drive’s I/O connector to screw terminals for easy wiring of input and output signals
- DIN rail-mountable breakout board
- 0.5 m extension cable included