You are here

Accessories in: Uncategorized

Showing all accessories in the selected category.

  • BLUMTR-CA-04

    Servo Motor Power Cable, 4 ft

    Product Features

    • Compatible with M series servo motors (w/o integral holding brakes)
    • Compatible with DC-powered servo drives, such as SV7, BLuDC9, and BLuDC4
    • Circular plastic connector (CPC) on motor end
    • Flying leads on drive end
  • BLUMTR-CA-10

    Servo Motor Power Cable, 10 ft

    Product Features

    • Compatible with M series servo motors (w/o integral holding brakes)
    • Compatible with DC-powered servo drives, such as SV7, BLuDC9, and BLuDC4
    • Circular plastic connector (CPC) on motor end
    • Flying leads on drive end
  • BLUMTR-CA-20

    Servo Motor Power Cable, 20 ft

    Product Features

    • Compatible with M series servo motors (w/o integral holding brakes)
    • Compatible with DC-powered servo drives, such as SV7, BLuDC9, and BLuDC4
    • Circular plastic connector (CPC) on motor end
    • Flying leads on drive end
  • BLUMTR-FA-04

    Servo Motor Power Cable, 4 ft

    Product Features

    • Compatible with M series servo motors (w/o integral holding brakes)
    • Compatible with AC-powered servo drives, such as BLuAC5
    • Circular plastic connector (CPC) on motor end
    • Flying leads on drive end
  • BLUMTR-FA-10

    Servo Motor Power Cable, 10 ft

    Product Features

    • Compatible with M series servo motors (w/o integral holding brakes)
    • Compatible with AC-powered servo drives, such as BLuAC5
    • Circular plastic connector (CPC) on motor end
    • Flying leads on drive end
  • BLUMTR-FA-20

    Servo Motor Power Cable, 20 ft

    Product Features

    • Compatible with M series servo motors (w/o integral holding brakes)
    • Compatible with AC-powered servo drives, such as BLuAC5
    • Circular plastic connector (CPC) on motor end
    • Flying leads on drive end
  • BOB-1

    Breakout Board for 25-pin D-Sub Connectors

    Product Features

    • Convert a drive’s female 25-pin D-sub connector to screw terminals
    • Din-rail mountable
    • 3 ft extension cable included
  • BOB-2

    Breakout Board for 25-pin D-Sub Connectors

    Product Features

    • Convert a drive’s male 25-pin D-sub connector to screw terminals
    • Din-rail mountable
    • 3 ft extension cable included
    • To use the BOB-2 with TSM StepSERVO™ products, please purchase cable 3004-314
  • BOB-4

    Breakout Board for SV200 I/O Connector
    , , ,

    Product Features

    • Convert a SV200 servo drive’s I/O connector to screw terminals for easy wiring of input and output signals
    • DIN rail-mountable breakout board
    • 0.5 m extension cable included
  • CAA Encoder

    Incremental Encoder for HT17, HT23, and HT24 Step Motors

    Product Features

    • Fits onto rear shaft of HT17, HT23, and HT24 step motors
    • 2000 lines (8000 counts per rev.). Other resolutions available upon request.
    • A, B, and Z (Index) channels
    • Differential outputs
    • 5 Vdc input voltage
    • Use with 3004-329-10 or 3004-349-03 extension cable
  • MMI-01

    Operator Interface for Si Programmer™

    Product Features

    • 4 line X 20 character display
    • 20 Keys for entering program parameters
    • Enter distance, speed, repeat count, yes/no decisions, and menu functions in an Si Program
  • MMI-02

    Operator Interface for Si Programmer™

    Product Features

    • 4 line X 20 character backlit display
    • 20 Keys for entering program parameters
    • Enter distance, speed, repeat count, yes/no decisions, and menu functions in an Si Program
  • RC-050

    Regeneration Clamp for DC-Input Drives and Integrated Motors

    Product Features

    This product is approaching end-of-life (EoL). Please read this notification before purchasing.

    • Compact regen clamp for DC-powered drives
    • 50 W continuous
    • 800 W peak
  • RC880

    Regeneration Clamp for DC-Input Drives and Integrated Motors
    , ,

    Product Features

    • Compact regen clamp for DC-powered drives
    • Provides protection for regulated power supplies
    • 50 W continuous
    • 800 W peak
  • Si-100

    Si Programmable Indexer

    Product Features

    • High speed, differential step & direction outputs interface easily to both step and servo motor drives
    • Programmable for stand-alone operation with Applied Motion’s easy-to-use Si Programmer™ software
    • Can be operated in host mode by streaming serial commands from a host PC or PLC using Serial Command Language™ (SCL)
    • Can be networked with other stepper and servo products using a SiNet Hub
    • 110 or 220 VAC input, switch selectable
    • 24 and 5 VDC user supplies
    • 8 optically isolated, 5-24 VDC inputs
    • 3 optically isolated, 24 VDC outputs
    • Programming and serial communication via RS-232
    • Software and programming cable included
    • Screw terminal connector blocks for power and I/O
    • Optional operator terminal (MMI) for Si programming mode
    • CE and TUV compliant
  • SiNet Hub 444

    Multi-Axis Motion Hub with I/O
    ,

    Product Features

    This product is approaching end-of-life (EoL). Please read this notification before purchasing.

    • Network Applied Motion stepper and servo drives for multi-axis motion applications
    • Programmable for stand-alone operation with easy-to-use SiNet Hub Programmer™ software
    • Use in router mode for streaming serial commands from a host PC or PLC using Applied Motion’s Serial Command Language™ (SCL)
    • Five RS-232 ports: 1 for host, 4 for drives
    • Four optically isolated programmable inputs
    • Four optically isolated programmable outputs
    • Optional DIN rail mounting kit (see SiNet Hub 444-DIN)
  • SiNet Hub 444-DIN

    Multi-Axis Motion Hub with I/O
    ,

    Product Features

    This product is approaching end-of-life (EoL). Please read this notification before purchasing.

    • Network Applied Motion stepper and servo drives for multi-axis motion applications
    • Programmable for stand-alone operation with easy-to-use SiNet Hub Programmer™ software
    • Use in router mode for streaming serial commands from a host PC or PLC using Applied Motion’s Serial Command Language™ (SCL)
    • Five RS-232 ports: 1 for host, 4 for drives
    • Four optically isolated programmable inputs
    • Four optically isolated programmable outputs
    • Software and programming cable included
    • Available without DIN rail mounting kit (see SiNet Hub 444)
  • SiNet Hub 8

    Multi-Axis Motion Hub

    Product Features

    This product is approaching end-of-life (EoL). Please read this notification before purchasing.

    • Network Applied Motion stepper and servo products for multi-axis motion applications
    • Programmable for stand-alone single or multi-axis operation with easy-to-use SiNet Hub Programmer™ software
    • Use in router mode for streaming serial commands from a host PC or PLC using Applied Motion’s Serial Command Language™ (SCL)
    • Nine RS-232 ports: 1 for host, 8 for stepper/servo drives
    • Software and programming cable included
  • WAA Encoder

    Incremental Encoder for HT17 Step Motors

    Product Features

    • Fits onto rear shaft of HT17 step motors
    • 5 mm hub diameter
    • 2000 lines (8000 counts per rev.)
    • A, B, and Z (Index) channels
    • Differential outputs
    • 5Vdc input voltage
    • Use with 3004-195-10 extension cable
  • YAA Encoder

    Incremental Encoder for HT34 Step Motors

    Product Features

    • Fits onto rear shaft of HT34 step motors
    • 3/8” hub diameter
    • 2000 lines (8000 counts per rev.)
    • A, B, and Z (Index) channels
    • Differential outputs
    • 5Vdc input voltage
    • Use with 3004-195-10 extension cable
  • ZAA Encoder

    Incremental Encoder for HT23 and HT24 Step Motors

    Product Features

    • Fits onto rear shaft of HT23 and HT24 step motors
    • 1/4” hub diameter
    • 2000 lines (8000 counts per rev.)
    • A, B, and Z (Index) channels
    • Differential outputs
    • 5Vdc input voltage
    • Use with 3004-195-10 extension cable

Pages