Hardware Manuals
The part numbers below represent the current full line of Applied Motion Products drive and control electronics. You can download any of the manuals by simply clicking on one of the part numbers below. These downloadable files are in Adobe's .pdf format, which is viewable and printable using the Adobe Acrobat Reader™. If you do not have the Acrobat Reader™, you can visit Adobe's website to get a free copy.
STEPPER DRIVES
[ ST Stepper Drives ]
[ Open Frame Stepper Drives ]
[ Packaged Stepper Drives ]
[ Open frame Programmable Stepper Drives ]
[ Packaged Programmable Stepper Drives ]
SERVO DRIVES
[ Packaged Servo Drives ]
[ Open Frame Servo Drives ]
CONTROLS
[ SiNet Hubs ]
[ Stand-Alone Oscillators and Indexers ]
OBSOLETE PRODUCTS
[ Obsolete Products ]
 |
| ST5-S ST10-S |
5.0 or 10.0 Amp/phase, advanced current control, microstepping drive.
Step & Direction, Oscillator (velocity) mode, SCL Command Language, SiNet Hub mode. No PDF manual available: manual included as Help File with ST Configurator software. |
Download ST Configurator | ||
| ST5-Q ST10-Q |
540 kB | 5.0 or 10.0 Amp/phase, advanced current control, programmable microstepping drive. Q Programmer compatible. |
 |
 |
| ST5-Si ST10-Si |
540 kB | 5.0 or 10.0 Amp/phase, advanced current control, programmable microstepping drive. Si Programmer compatible. |
|
|
|
| 1030 | 96 kB | 1.0 Amp/phase OEM stepper drive. Full, Half and quarter step. |
|
|
| 1035D | 168 kB | Two-axis, 1 Amp/phase, 12-35 Vdc, PLC packaged full and half step drive. |
|
|
| 2035 | 219 kB | 2 Amp/phase, full and half step drive. |
|
|
| 2035-O | 219 kB | 2 Amp/phase, full and half step drive with on-board oscillator. |
|
|
| 3535 | 203 kB | 3.5 Amp/phase, full and half step drive. |
|
|
| 3535-O | 203 kB | 3.5 Amp/phase, full and half step drive with on-board oscillator. |
|
|
| 3540M | 208 kB | 3.5 Amp/phase, microstep drive. |
|
|
| 3540MO | 247 kB | 3.5 Amp/phase, microstepping oscillator drive. |
|
|
| 5560 | 253 kB | 5.5 A/phase, microstep drive. |
|
|
| 7080 | 274 kB | 7 A/phase, microstep drive. |
|
|
|
| PDO 2035 | 265 kB | 2 A/phase, full and half step drive with on-board oscillator, packaged with a power supply. |
|
|
| PDO 3540 | 143 kB | 3.5 A/phase, microstep drive with on-board oscillator, packaged with a power supply. |
|
|
| PDO 5580 | 149 kB | 5.5 A/phase, microstep drive with on-board oscillator, packaged with a power supply. |
|
|
|
Open frame Programmable Stepper Drives
| 1240i | 225 kB | 1.2 A/phase, microstep programmable drive. |
|
|
| 3540i | 225 kB | 3.5 A/phase, microstep programmable drive. |
|
|
| 7080i | 212 kB | 7 A/phase, microstep programmable drive. |
|
|
|
Packaged Programmable Stepper Drives
| Si2035 | 241 kB | 2 A/phase microstep programmable drive packaged with a power supply. | |
|
| Si3540 | 117 kB | 3.5 A/phase microstep programmable drive packaged with a power supply. | |
|
| Si5580 | 212 kB | 5.5 A/phase microstep programmable drive packaged with
a power supply. "NEW" version. CE Compliant and TUV Certified. |
|
|
| STAC6 | 6.0 A/phase microstep programmable drive with high bus voltage and advanced features to optimize step motor performance. No PDF manual available: manual included as Help File with Configurator software. |
Download STAC6 Configurator | ||
|
| BLuAC5-Si | 1.1 MB | 5A cont 15A peak servo drive | |
|
| BLuAC5-S and -Q | 1.2 MB | 5A cont 15A peak servo drive | |
|
|
| BLuDC4-S and -Q | 995 kB | 4.5A cont 13.5A peak servo drive, basic control (-S) and Q-compatible (-Q). | |
|
| BLuDC4-Si | 358 kB | 4.5A cont 13.5A peak servo drive, bult-in Si indexer | |
|
| BLuDC9-S and -Q | 995 kB | 9A cont 18A peak servo drive, basic control (-S) and Q-compatible (-Q). | |
|
| BLuDC9-Si | 358 kB | 9A cont 18A peak servo drive, bult-in Si indexer | |
|
|
| SiNet Hub 444 | 137 kb | 4 Port Hub with 4 inputs and 4 outputs | |
|
| SiNet Hub 8 | 162kb | 8 Port Hub | |
|
|
Standalone Oscillators and Indexers
| Si-100 | 223 kB | Stand-alone, programmable indexer. (See Si Programmer™ software). | |
|
| MMI | Operator interface for Si/i programmable drives | manual coming soon | |
|
| BLSi7080 | 149 kB | 7A cont/14A peak, 80V Packaged servo drive. AC input, Si control. replaced by BLuAC5-Si |
|
|
| BLx7080 | 149 kB | 7A cont/14A peak, 80V Packaged servo drive. AC input, eXposition control. see BLuAC5 Series |
|
|
| BL7080i | 149kb | 7A continous/14A peak , programmable servo drive with Si control. see BLuDC9-Si |
|
|
| BL7080x | 800kb | 7A continous/14A peak , programmable servo drive with eXposition control. see BLuDC9 Series |
|
|
| PD2035 | replaced by PDO2035 | |||
| PD5580 | replaced by PDO5580 | |||
| PD4500 | replaced by STAC6-S | |||
| Si4500 | replaced by STAC6-Si | |
||
| PD8400 | replaced by STAC6-S | |||
| Si-1 | 197 kB | Stand-alone, programmable indexer. see Si-100 |
|
|
All "i" and "Si" drives in the above table indicate programmable drives or indexers that use Applied Motion Products easy-to-use Simple Indexer™ Programming software.
 |
© 2008 Applied Motion Products.
Website design by DMT Media |
|