Features:

• Programmable for stand alone operation with Applied Motion' s easy to use Si Programmer™ Windows software (software and programming cable included)

• Can be operated in real time form a host PC or PLC using Applied Motion' s Si Command Language™ (SCL).

• Can be networked with all other Si™ products via Applied Motion' s SiNet™ Hub

• DC bus voltage 12-42 VDC motor supply (including ripple)

• Software selectable from 0.23.5 amps/phase motor current

• Software selectable Step resolutions from 2,000 to 50,800 steps per revolution

• Software selectable idle current reduction 0%, 25%, 50% or 100%

• 8 user programmable inputs

• 3 optically isolated 524 VDC outputs

• Communication via RS232 or optional encoder/RS485 daughter board

• 140 watts of usable power

• Screw terminal connector blocks for power, motor and I/O. RJ11 for RS232 port

• MOSFET, dual H-Bridge, inaudible PWM amplifier

• 3 state, pulse width modulated current control, switching at 2030 kHz

• Optional RS485 and encoder input board

• Optional operator terminal (MMI) either standard or backlit

• Drives 4, 6 or 8 lead size 11, 14, 17, 23 or 34 step motors

• CE and TUV compliant

Description:

The 3540i is a programming step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt micro-stepping amplifier.

The 3540i includes Applied Motion' s easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 3540i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ .

For multi-axis applications, up to eight Applied Motion Si™ drives (stepper or Servo) can be networked using a single SiNet™ Hub.

The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays.

Related links:

Multi Axis Hubs

MMI Operator Interface

Optional RS485 and Encoder Interface

SCL Command Language

PS430 Power Supply