Products: Stepper Products: Stepper Motors: Size HT 17
 |
|
This table shows recommended motors, which represent our most popular model types and are typically held in stock in Watsonville, CA.
| RECOMMENDED MOTORS | ||||||||||||
| Part # | MOTOR CONNECTION 1=series 2=parallel 3=unipolar |
Motor Length (inches) |
Minimum Holding Torque (oz-in) |
Leads | Step Angle (deg) |
Volts | Amps | Ohms | mH | Rotor Inertia (oz-in2/g-cm2) |
Motor Weight (lbs) |
Outline Drawings |
| HT17-068 | 1 | 1.3 | 31.4 | 8 | 1.8 | 5.7 | 0.67 | 8.4 | 11.2 | 0.19/35 | 0.44 |
   |
| 2 | 2.8 | 1.34 | 2.1 | 2.8 | ||||||||
| 3 | 22.2 | 4.0 | 0.95 | 4.2 | 2.8 | |||||||
| HT17-071 | 1 | 1.54 | 51.0 | 8 | 1.8 | 5.7 | 0.85 | 6.6 | 14.4 | 0.29/54 | 0.57 |
|
| 2 | 2.8 | 1.70 | 1.7 | 3.6 | ||||||||
| 3 | 36.1 | 4.0 | 1.20 | 3.3 | 3.6 | |||||||
| HT17-075 | 1 | 1.85 | 62.8 | 8 | 1.8 | 5.7 | 0.85 | 6.6 | 12.0 | 0.37/68 | 0.73 |
|
| 2 | 2.8 | 1.70 | 1.7 | 3.0 | ||||||||
| 3 | 44.4 | 4.0 | 1.20 | 3.3 | 3.0 | |||||||
• Part numbers listed are for single shaft. To order double shaft add "D' to the end.
• All size HT17 motors are optimized for microstepping.
| Optional Encoders |
| If required in an application, double shaft motors can be fitted witn an encoder. For standard encoder options with HT17 motors click here. |
| Torque v. Speed Curves |
| Motor | 1240i | 2035 2035-O |
2035XD | 3535 3535-O |
3540M 3540MO 3540i |
7080 7080i |
PDO2035 | PDO3540 Si3540 |
PDO5580 Si5580 |
| HT17-068 | Download | Download | Download | Download | Download | Download | Download | Download | |
| HT17-071 | Download | Download | Download | Download | Download | Download | Download | ||
| HT17-075 | Download | Download | Download | Download | Download | Download | Download |
| Dimensions |
 |
© 2008 Applied Motion Products.
Website design by DMT Media |
|