Products: Stepper Products: Stepper Motors: Size HT 11
 |
   
|
This table shows recommended motors, which represent our most popular model types and are typically held in stock in Watsonville, CA.
| RECOMMENDED MOTORS | ||||||||||||
| Part # | MOTOR CONNECTION 1=series 2=parallel 3=unipolar |
Motor Length (inches) |
Minimum Holding Torque (oz-in) |
Leads | Step Angle (deg) |
Volts | Amps | Ohms | mH | Rotor Inertia (oz-in2/g-cm2) |
Motor Weight (lbs) |
Outline Drawings |
| HT11-012 | 2 | 1.32 | 7.0 | 4 | 1.8 | 1.4 | 1.0 | 1.4 | 1.4 | .044/8 | 0.26 |
   |
| HT11-013 | 2 | 1.87 | 15 | 4 | 1.8 | 2.0 | 1.0 | 2.0 | 2.6 | .098/18 | 0.39 |
|
• Part numbers listed are for single shaft. To order double shaft add "D" to the end of the part number. Example: HT11-012D.
| Torque v. Speed Curves |
| Motor | 1030 | 1240i | 2035 2035-O |
2035XD | 3535 3535-O |
3540M 3540MO 3540i |
| HT11-012 | Download | Download | Download | Download | ||
| HT11-013 | Download | Download | Download | Download |
| Dimensions |
 |
© 2008 Applied Motion Products.
Website design by DMT Media |
|