Products: Stepper Products: Stepper Motors: Size 42
 |
 |
| Part # | MOTOR CONNECTION 1=series 2=parallel 3=unipolar |
Motor Length (inches) |
Minimum Holding Torque (oz-in) |
Leads | Step Angle (deg) |
Volts | Amps | Ohms | mH | Rotor Inertia (oz-in2/g-cm2) |
Motor Weight |
Outline Drawings |
| 5042-022 | 1 | 7.7 | 1591.0 | 8 | 1.8 | 3.8 | 6.70 | 0.56 | 7.6 | 49.2/9000 | 18.3 |    |
| 2 | 1.9 | 13.40 | 0.14 | 1.9 | ||||||||
| 3 | 1125.0 | 2.7 | 9.50 | 0.28 | 1.9 | |||||||
| 5042-023 | 1 | 7.7 | 1591.0 | 8 | 1.8 | 6.6 | 3.32 | 2.0 | 35.2 | 49.2/9000 | 18.3 | |
| 2 | 3.3 | 6.65 | 0.5 | 8.8 | ||||||||
| 3 | 1125.0 | 4.7 | 4.70 | 1.00 | 8.8 |
Recommended motors represent our most popular model types and are typically held in stock in Watsonville, CA.
• Part numbers listed are for single shaft. To order double shaft add "D" to the end of the part number. Example: 5042-022D.
• All size 42 motors are optimized for microstepping and use with a 160 volt drive.
 |
© 2008 Applied Motion Products.
Website design by DMT Media |
|