Products: Stepper Products: Stepper Motors: Size 34
 |
|
This table shows recommended motors, which represent our most popular model types and are typically held in stock in Watsonville, CA.
| RECOMMENDED MOTORS | ||||||||||||
| Part # | MOTOR CONNECTION 1=series 2=parallel 3=unipolar |
Motor Length (inches) |
Minimum Holding Torque (oz-in) |
Leads | Step Angle (deg) |
Volts | Amps | Ohms | mH | Rotor Inertia (oz-in2/g-cm2) |
Motor Weight (lbs) |
Outline Drawings |
| 5034-3481 | 1 | 2.5 | 212.0 | 8 | 1.8 | 3.0 | 2.42 | 1.3 | 10.0 | 3.66/670 | 3.00 |  |
| 2 | 1.5 | 4.84 | 0.3 | 2.5 | ||||||||
| 3 | 150.0 | 2.1 | 3.42 | 0.6 | 2.5 | |||||||
| 5034-367D1,2 | 1 | 2.5 | 212.0 | 8 | 1.8 | 3.0 | 2.42 | 1.8 | 10.0 | 3.66/670 | 3.00 | |
| 2 | 1.5 | 4.84 | 0.45 | 2.5 | ||||||||
| 3 | 150.0 | 2.1 | 3.42 | 0.9 | 2.5 | |||||||
| 4034-329 | 1 | 3.7 | 424.0 | 6 | 1.8 | 4.2 | 2.83 | 1.5 | 12.0 | 6.72/1230 | 5.40 | |
| 3 | 300.0 | 3.0 | 4.00 | 0.8 | 3.0 | |||||||
| 5034-3491 | 1 | 3.7 | 447.0 | 8 | 1.8 | 3.5 | 3.54 | 1.0 | 11.6 | 6.72/1230 | 5.40 | |
| 2 | 1.8 | 7.07 | 0.3 | 2.9 | ||||||||
| 3 | 316.0 | 2.5 | 5.00 | 0.5 | 2.9 | |||||||
| 5034-368D1,2 | 1 | 3.7 | 447.0 | 8 | 1.8 | 3.5 | 3.54 | 1.0 | 11.6 | 6.72/1230 | 5.4 | |
| 2 | 1.8 | 7.07 | 0.3 | 2.9 | ||||||||
| 3 | 316.0 | 2.5 | 5.00 | 0.5 | 2.9 | |||||||
| 4034-334 | 1 | 5.1 | 636.0 | 6 | 1.8 | 6.1 | 2.47 | 2.4 | 28.0 | 10.2/1870 | 7.70 | |
| 3 | 450.0 | 4.3 | 3.50 | 1.2 | 7.0 | |||||||
| 5034-3501 | 1 | 5.1 | 667.0 | 8 | 1.8 | 3.5 | 4.17 | 0.8 | 10.4 | 10.2/1870 | 7.70 | |
| 2 | 1.8 | 8.34 | 0.2 | 2.6 | ||||||||
| 3 | 472.0 | 2.5 | 5.90 | 0.4 | 2.6 | |||||||
| 5034-369D1,2 | 1 | 5.1 | 667.0 | 8 | 1.8 | 3.5 | 4.17 | 1.44 | 10.4 | 10.2/1870 | 7.70 | |
| 2 | 1.8 | 8.34 | 0.36 | 2.6 | ||||||||
| 3 | 472.0 | 2.5 | 5.90 | 0.72 | 2.6 | |||||||
• Part numbers listed are for single shaft. To order double shaft add "D" to the end of the part number. Example: 5034-348D.
• All size 34 motors are optimized for microstepping.
1Optimized for use with 160 volt drives.
2Motor with 10' shielded cable.
 |
© 2008 Applied Motion Products.
Website design by DMT Media |
|