You are here

STR3 - Miniature Advanced Microstep Drive

Microstep Drives for step & Direction ApplicationsMicrostep Drive for step &
Direction Applications

Great for OEM applications requiring basic step &
direction control of a 2-phase step motor

  • Step & direction or CW/CCW pulse control
  • High performance
  • Anti-resonance
  • Microstepping
  • Mictostep emulation
  • Simple setup
  • Matched step motors available

Designed for OEMsDesigned for OEMs

The STR3 miniature stepper drive is great for OEM applications requiring basic step & direction control of a 2-phase step motor. The drive accepts a range of supply voltages, from 12 to 48 volts DC, and is ideal for use with motor frame sizes NEMA 8 to NEMA 24. Recommended motors for use with this drive are listed below.

  • Step & Direction or CW/CCW Pulse control
  • Automatic idle current reduction
  • Built-in self test move profile
  • DIP switch setup - no software required

Compact Size for Mounting AnywhereCompact Size for Mounting Anywhere

The STR3 is ultra-compact, meaning it can be mounted just about anywhere on the machine. Next to the motor, directly on the machine frame, tucked behind some other components, or located in a control panel with other devices, the STR3 is right at home.

  • Compact size 2.38 x 1.77 x 1.10 inches
  • Pluggable connectors for motor, supply voltage and I/O

Small but PowerfulSmall but Powerful

The STR3 drive features advanced microstepping performance and sophisticated current control with anti-resonance. Each STR3 drive can microstep up to 20,000 steps/rev with a 1.8° step motor (1/100 step), and can even microstep the step motor when the command pulses are low resolution. This feature is called Microstep Emulation. Anti-resonance electronically damps motor and system resonances, which improves motor smoothness and torque over a wide speed range.

  • Current range 0.3A to 3 A/phase
  • Electronic damping (anti-resonance)
  • Microstepping & Microstep Emulation
  • Selectable digital input filter

Specifications:

Model Number: STR3
Supply Voltage: 12-48 VDC
Control Modes: Step & Direction, CW/CCW Pulse
Output Current: 0.3-3.0 A/phase, peak-of-sine
Encoder Feedback: No
Step Resolution: Full, Half, Microstepping, Microstep Emulation
Idle Current Reduction: 50% or 90%
Setup Method: Dip Switches
Digital Inputs: 3 differential digital inputs (STEP+, STEP-, DIR+, DIR-, EN+, EN-)
Dimensions: 2.38 x 1.77 x 1.10 inches
Operating Temperature Range: 0 to 85 °C
Ambient Temperature Range: 0 to 50 °C
Ambient Humidity: 90% max, non-condensing
Status LEDs: 1 red, 1 green
Circuit Protection: Short circuit, over-voltage, under-voltage, over-temp

 

Recommended Motors:

NEMA 8 NEMA 11 NEMA 17 NEMA 23 NEMA 24
HT08-020 HT11-012 HT17-275 HT23-595 HT24-100
HT08-021 HT11-013   HT23-598  
      HT23-601  

 

Dimensions:

STR3 dimensions

I/O Connections:

STR3 I/O connections

Product Page:

Click here to view the STR3 product page.

 

Interested in this Product?

 

Submit the form below to request pricing or samples. An Applied Motion Products representative will be in touch with you shortly.